Table of Contents
Advertisement
Slave Cabinet Set-Up
Refer to "Typical Central Office Configurations" for setting the following
options. Default settings are bold.
Note: Observe the following Special Installation Note when adding a second
cabinet:
If you are adding a second cabinet (slave) to an existing installation that has a
Primary Rate span configured, you must re-database the number of ISDN
channels in the Master cabinet. The re-dimensioning of the system to the new
double cabinet (master/slave) configuration
causes
(0-23) to be reset to the default value of zero (0).
Set up Slave Span
(0-1)
Network Type
0-Public
1-Private
(0-1)
Auto Progress
0-Disable
1-Enable
(0-2)
NSF
0-None
1-SDN
2-MegaCom
(0-3)
- ISDN CO Type
0- 4ESS
1- 5ESS
2- Reserved
3- DMS-100
(0-1)
ISDN International
Dial Code Deduction
0-Send as is
1-Deduct 0 1 1 from the code
DBS-2.3-400
DBS Manual - Revised April 2000
Page A-19
Advertisement
Table of Contents
