Switching On And Off - Sim2 NERO 3 PLUS Quick Start Manual

Zoom and Focus
The NERO3PLUS provides manual Zoom and Focus controls.
Item Description
B Horizontal Lens Shift Lever
C Zoom Ring
D Focus Ring
E Vertical Lens Shift Lever
Switching On and Off
Switching On
I. Securely connect the power cord supplied and the signal cable. When connected, the
Power LED will turn red.
II. Turn on the projector by pressing button either on the back panel of the projector or
the " " button on remote control. The power LED will now turn blue. The startup screen
will display in approximately 10 seconds. The first time you use the projector, you will be
asked to select the preferred language.
III. Turn on and connect the source that you want to display on the screen (computer,
notebook, video player, etc). The projector will detect the source automatically. If not,
push menu button and go to "SETUP". Make sure that the "Source Lock" has been set
to "Off".
Note: if you connect multiple sources at the same time, press the "SOURCE" button on the back
panel or the direct source keys on the remote control to switch between inputs.