Pick Mode; Multiple Label Reading - Datalogic RIDA DBT6400 Quick Reference Manual

Scan Modes

Pick Mode

Pick Mode is a Decoding and Transmission process where bar
codes that are not within the configurable distance from the
center of the aiming pattern are not acknowledged or trans-
mitted to the Host. It is active only while the scanner is in
Trigger Single mode. If the scanner switches to a different
Read Mode, Pick Mode is automatically disabled.
NOTE
PICK MODE

Multiple Label Reading

Enables/disables the ability of the scanner to decode multiple
labels in the same image. Several programming options are
available for this feature, see the PRG for more information.
28
This feature is not compatible with Multiple
Labels Reading in a Volume. See the PRG for
more information.
ENTER/EXIT PROGRAMMING MODE
Pick Mode = Disable
Pick Mode = Enable
RIDA™ DBT6400