Selecting The Base Interface Type; Configuring The Interface - Datalogic RIDA DBT6400 Quick Reference Manual

Selecting the Base Interface Type

Selecting the Base Interface Type
Upon completing the physical connection between the base
and its host, proceed directly to Interface Selection to select
the kind of USB interface type the base is connected to; scan
the appropriate bar code for your system's interface type.
The base will support the following USB host interfaces:
• USB COM to simulate RS-232 standard interface
• USB-OEM (can be used for OPOS/UPOS/JavaPOS)
• USB Keyboard (standard or alternate key encoding)
• USB Keyboard for Apple computers
For defaults and additional information associated with each
interface, proceed to the corresponding chapter in the Product
Reference Guide.

Configuring the Interface

Scan the programming bar code which selects the appropriate
interface type for the system the reader will be connected to.
Unlike some other programming features and
options, interface selections require that you
scan only one programming bar code label. DO
NOT scan an ENTER/EXIT bar code prior to scan-
NOTE
ning an interface selection bar code.
USB INTERFACES
USB COM to simulate RS-232 standard interface
22
Select USB-COM-STD
(can be used for OPOS/UPOS/JavaPOS)
Select USB-OEM
USB-OEM
a
RIDA™ DBT6400