Using The Bc6020 Base Station - Datalogic RIDA DBT6400 Quick Reference Manual

Setting Up the Reader
The figure below shows how to connect the Base Station to a
terminal PC or to another Host device.

Using the BC6020 Base Station

LEDs on BC6020 Base Station provide information about the
Base as well as the battery charging status, as shown in the
figure below.
The behaviour and meaning of the LEDs are summarized in
Table 1:
Table 1. Radio Base LEDs
Power On/ Data
4
Power On/
Data LED
LED
Yellow On = base is powered.
Yellow Blinking = base receives data
and commands from the Host or the
reader.
Charging LED
Status
RIDA™ DBT6400