Linking to a Host
Bluetooth Pairing
To pair with a Bluetooth enabled Host:
1.
Press the scan button to wake up the reader.
2.
Press the Link button. The blue LED blinking indicate
that the s
natively, you can read one of the profile labels (see
Linking to a Host on page
become automatically discoverable by the Host.
3.
On the Host, use the dedicated Bluetooth applica-
tion to search for new devices. Select the RIDA
scanner from the list of available devices. If you
receive an error message, it may be necessary to
disable security on the device.
When the scanner ends the pairing w
4.
blue LED remains on. Depending on the Bluetooth pro-
file, you can check the connection:
A. For SPP: use an RS-232 terminal program to see
incoming data on the port designated by the
Host Bluetooth application.
B. For HID: use a text editor to see incoming data on
the Host.
NOTE
Bluetooth Unpairing
To unpair the reader and the Host, press and hold the Link
button until the blue LED turns off.
Alternatively, read the following unlink label.
8
canner is discoverable by the Host. Alter-
The DBT6400 reader can be set up to require a
PIN code when connecting. If you want to set up
a PIN, or add new equipment to a system that
uses a custom security PIN, please refer to the
PRG for details.
7) and the reader will
Unlink
ith the Host the
RIDA™ DBT6400