Related Manuals for Datalogic FireScan D141
Summary of Contents for Datalogic FireScan D141
- Page 1 FireScan™ D141 READERS QUICK REFERENCE INSTALLAZIONE RAPIDA INSTALLATION RAPIDE SCHNELLINSTALLATION INSTALACIÓN RÁPIDA 820001300...
-
Page 2: Using Firescan™ Series Readers
USING FIRESCAN™ SERIES READERS FireScan guns automatically scan barcodes at a distance. Simply aim and pull the trigger. Code scanning is performed along the scan line emitted from the reading window. This line must cross the entire code. Successful scanning is obtained by tilting the scanner with respect to the barcode to avoid direct reflections which impair the reading performance, see the figure. - Page 3 Die FireScan Lesepistolen lesen Strichcodes automatisch und berührungslos. Es genügt auf den Code zu zielen und die Taste zu drücken. Der Code wird mittels einer Lichtlinie gelesen, die das Gerät durch das Lesefenster verlässt und den gesamten Code durchqueren muß. Eine optimale Lesung ist gewährleistet, wenn der Benutzer die Pistole bzgl.
-
Page 4: Disconnecting The Cable
CONNECTIONS DISCONNECTING THE CABLE... -
Page 5: Cable Clamp
CABLE CLAMP An adhesive cable clamp is provided to fix the cable to a surface. Il fermacavo adesivo fornito consente di fissare il cavo ad una superficie. Le serre-fil adhésive fourni permis de fixer le câble sur la surface voulue. Die klebende Kabelverschraubung erlaubt das Kabel auf die Tischoberfläche zu verschrauben. -
Page 6: Electrical Connections
ELECTRICAL CONNECTIONS The FireScan™ D141 scanner can be used with CAB 397 (coiled cable and 9-pin male connector) for direct connection to the DATAPLUS and DLD series decoders. CAB 397 1 - Not connected 5 - TRIGGER 2 - SCAN 6 - BEEPER/LED 3 - Not connected 7 - VIDEO... - Page 7 BEEPER/LED This scanner input drives the green decoding LED, and the beeper in the scanner. The LED turns on when a positive current is applied to the pin. The beeper sound is obtained pulsating this current at a frequency of about 2 kHz. The maximum voltage that can be applied to this input is 5 Vdc.
-
Page 8: Technical Features
Laser Safety Class EN 60825-1 / CDRH Reading Field see reading diagram Max. Resolution 0.12 mm (5 mils) min. 15% (Datalogic Test Chart) Environmental Features 0 °C to + 50 °C Working Temperature -20 °C to + 70 °C Storage Temperature... -
Page 9: Reading Diagram
READING DIAGRAM Reading Zones (10° skew angle) 1.00 0.50 0.38 0.25 0.19 0.12 -100 -200 0.33 mm -300 800 mm FCC COMPLIANCE This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference which may cause undesired operation. -
Page 10: Warranty
5 anni dalla data di consegna, a condizione che il prodotto sia utilizzato come previsto. Datalogic si riserva la facoltà di riparare o sostituire il prodotto. Quanto sopra non prolunga la garanzia originale. La garanzia non si applica a prodotti utilizzati in modo non corretto, danneggiati accidentalmente, sottoposti a riparazioni non autorizzate o manomessi. -
Page 11: Services And Support
• Services – Warranty Extensions and Maintenance Agreements • Support – Software Driver Downloads • Contact Us – Listing of Datalogic Subsidiaries and Quality Partners • Authorised Repair Centres... - Page 12 DATALOGIC S.p.A., Via Candini, 2 40012 - Lippo di Calderara Bologna - Italy dichiara che declares that the déclare que le bescheinigt, daß das Gerät declare que el FireScan D1XX e tutti i suoi modelli and all its models et tous ses modèles...