Table of Contents
Advertisement
Feature Confirmation Chart
Feature
Lock
Unlock
Trunk
LED ON/OFF
Start
Running
Stop
Entering Cold
Weather Mode
Exiting Cold
Weather Mode
Home Valet
Valet Mode
Exit ValetMode
Fail Start Attempt
Vehicle Status Request
The status request feature allows the user to see the status of the vehicle i.e.: if the doors are
locked or unlocked or if the vehicle is in cold weather mode, home valet mode, in valet mode or
how much time is left in the run time cycle. The following charts (Tables 1, 2, 3 and 4) indicate the
confirmation sequences.
To retrieve the vehicle status:
Press and release the
The transmitter will then flash the corresponding sequence of LEDs depending on the vehicle's
status.
If the engine is NOT running, refer to Table 1.
If the vehicle is in or out of ready mode, refer to Table 2
If the engine IS running under a remote start, refer to Table 3 (if the doors are locked)
or refer to Table 4 (if the doors are unlocked).
The status request feature is a two-step procedure:
• The first sequence of flashes denotes if the vehicle's doors are locked or unlocked.
• The second sequence of flashes (if applicable) denotes if the vehicle is Cold weather mode,
Home valet mode, or, Valet mode.
• If there is no second sequence transmission, then the vehicle is none of the three (3) mentioned
features (Cold weather mode, Home valet mode or Valet mode).
AS-2360TW User Guide
LED #1
LED #2
3 flashes
X
X
3 flashes
X
X
3 flashes
3 flashes
X
X
X
X
X
X
X
X
X
X
3 flashes
X
3 flashes
X
X
3 flashes
X
X
button then press and release the
SHIFT
LED #3
LED #4
X
X
X
X
3 flashes
X
X
X
X
3 flashes
X
3 flashes
X
3 flashes
X
3 flashes
X
3 flashes
X
3 flashes
X
3 flashes
X
3 flashes
X
4 flashes
button (there will be a beep).
TRUNK
Beep(s)
1
2
1
1
1
3
2
2
1
2
1
1
4
P. 3
Advertisement
Table of Contents
