f)
g)
Current room temperature (report in precision of 0.5
(It will trigger room temperature report if there is 2
You can change this setting by set the configuration parameter)
Total 5 devices (nodes) can be assigned in total 3 association groups. Below table lists out the devices
(nodes) allocations in the 3 association groups.
No. of Node ID in
Important:
Please do not associate heater and compressor devices in same association group because heater and
compressor device can't turn on in simultaneously!
Example: Association groups setting
F-BW8170 (ZTS-500)
No. of Node ID in
0,1 or 2 nodes
Association group_1
for Auto report to gateway
Association group_2
for Heater
for Compressor
27
o
F)
o
F)
o
o
F / 1
C [default] differ from last report.
No. of Node ID in
Association Group_3
0,1 or 2 nodes
Z-Wave Gateway
(Node ID-A)
(Node ID-B)
F-BW8041 (ZFM-80)
(Node ID-D)
F-BW8041 (ZFM-80)
(Node ID-C)
F-BW8041 (ZFM-80)
(Node ID-E)