Z-Wave ZTS-500 User Manual page 14

For Fan Systems:
Press > to navigate to the fan system (Fan)
screen. Press + or – to entry the setting.
Press + or - to select your fan system type, either
gas-powered (Gas) or electric-powered (Ele).
Press and keep holding > for 2 seconds to
3
confirm your selection.
Press < to cancel the setting and back to the
previous screen.
Gas-powered : (pre-selected system)
- Fan will maintain off state.
Electric-powered:
- Fan will be turned on when there is heating.
For Fan Stages:
Press > to navigate to the fan stage (F-St) screen.
Press + or – to entry the setting.
Press + or - to select your fan stage, either
one stage (One) or two stages (Two) fan.
Press and keep holding > for 2 seconds to
confirm your selection.
Press < to cancel the setting and back to the
previous screen.
4
One stage : (pre-selected system)
- Fan speed: Auto/On
Two stages:
- Fan speed: Auto/High/Low
Remark:
- To exit the System Main menu, press and keep
holding < key for 3 seconds.
- After inclusion procedure, fan stages cannot be
changed. You must perform exclusion procedure
first if fan stages need to be changed.
14