Z-Wave ZTS-500 User Manual page 19

Temperature Display Unit (
Step Procedure / Description
In the System Main (SYS) screen:
Press > to navigate to the display unit (F/C)
1
screen. Press + or – to entry the setting.
Press + or - to select temperature display unit (°F
/ °C). Press > to confirm your selection.
Default is Fahrenheit (°F)
2
Sleep Timer
Step Procedure / Description
In the System Main (SYS) screen:
Press > to navigate to the LED sleep timer (LED)
1
screen. Press + or – to entry the setting.
Press + or - to adjust LED sleep timer.
Range: 3 to 60s or Always On
If powered by battery: 5s by default
If powered by 24Vac: 60s by default
Press > to confirm your selection.
2
Remark:
Reducing sleep timer value can enhance ZTS-500
battery service life significantly.
o o
F/ C)
19
LED indication
LED indication