Remove the screws from the front of the LCD panel assembly.
4
Screw
Carefully separate the front and back of the LCD panel assembly.
5
Lift the inverter from the LCD panel assembly.
6
Disconnect the connectors from the old inverter and connect them to the new
7
inverter.
Align the holes in new inverter with the pegs in the LCD lid, then press the inverter
8
into place.
Press the LCD panel front and back together. Press the two halves together in
9
several places until they click in place. You should find no loose spots or spots
where the two halves do not meet.
Replace the LCD panel assembly screws removed in
10
Replace the rubber inserts removed in
11
Replace the LCD panel by following the steps in
12
page
84.
88
Screw
Screw
Screw
Screw
Screw
Step
4.
Step
3.
"Replacing the LCD assembly" on
Chapter 3: Replacing notebook components