Replacing the touchpad button board/
fingerprint assembly
Tools you need to complete this task:
v
Screws removed during this task:
To replace the touchpad button board/fingerprint assembly:
Complete the steps in
1
Remove the memory bay cover by following the steps in
2
memory modules" on page
If the notebook has wireless networking built in, unplug the wireless antennas by
3
following the steps in
106
Flat-blade driver
Phillips #0 screwdriver
2 black M2.5×5
(Keyboard cover)
1 black
M2.5×8
(Keyboard plate)
3 black M2.5×5 (Palm
rest-bottom)
4 chrome
M3×3
(Touchpad cover)
"Preparing the notebook" on page
"Replacing the IEEE 802.11 wireless card" on page
- OR -
2 black M2.5×6.5
(Hinge-bottom)
4 black M2.5×4 (Palm
Rest-top)
2 black M2.5×3 (Palm
rest-bottom)
57.
Chapter 3: Replacing notebook components
Scribe or non-marring tool
4 chrome M2.5×6.5
(Hinge-top)
16 black M2.5×6.5
(Palm rest-bottom)
2 black M2.5×4
(Touchpad button
board/fingerprint
assembly)
55.
"Adding or replacing
67.