Replacing The Lcd Assembly - Acer TRAVELMATE 7730 Service Manual

Replacing the LCD assembly

Tools you need to complete this task:
v
Screws removed during this task:
To replace the LCD assembly:
Complete the steps in
1
Open the memory bay by following the steps in
2
modules" on page
Open the wireless bay by following the steps in
3
card" on page
If the notebook has wireless networking built in, unplug the wireless antennas by
4
following the steps in
Taking care to note the cables' routing and positions as they are installed from
5
Acer, slide the antenna cables out of the wireless bay.
84
Flat-blade driver
Phillips #0 screwdriver
2 black M2.5×5
(Keyboard cover)
"Preparing the notebook" on page
57.
67.
"Replacing the IEEE 802.11 wireless card" on page
- OR -
2 black M2.5×6.5
(Hinge-bottom)
"Adding or replacing memory
"Replacing the IEEE 802.11 wireless
Chapter 3: Replacing notebook components
Scribe or non-marring
4 black M2.5×6.5
(Hinge-top)
55.
67.