Acer TRAVELMATE 7730 Service Manual page 91

Remove the screws connecting the power button board to the notebook.
5
Replace the power button board, then replace the screws removed in
6
Make sure the black connector clip on the new power button board is swung
7
upward, insert the cable into the connector, then swing the clip down to lock the
connector in place.
Important:
Close the keyboard compartment by following the steps in
8
keyboard" on page
Replace the keyboard cover by following the steps in
9
cover" on page
Chapter 3: Replacing notebook components
Screw
The cable is correctly oriented if it is not twisted and the blue
band is facing up.
80.
78.
Screw Screw
"Replacing the
"Replacing the keyboard
Step 5.
83