Insert the small flat-blade screwdriver under each end of the keyboard cover and
6
gently pry it up.
Pull the cover off the notebook by lifting the back corners of the cover. Be careful
7
to not damage the LCD panel.
Replace the keyboard cover by first inserting the tabs located on the front of the
8
cover into the slots provided, then pressing down on the back. Press down on the
cover in several places until it clicks in place. The cover is correctly mounted when
you can run you finger along the cover and find no loose spots. The cover should be
flat all the way across.
Caution:
Close the LCD panel.
9
Turn your notebook over so the bottom is facing up.
10
Replace the screws removed in
11
Chapter 3: Replacing notebook components
If the cover is not correctly replaced, your notebook could be
damaged when you try to close the LCD panel.
Step
2.
79