In any menu, you can load default settings by pressing F9. You can also press F10 to
❑
save any changes made and exit the BIOS Setup Utility.
Note:
BIOS Setup Utility screens
Note:
Information screen
The Information screen displays a summary of your notebook hardware information.
Parameter
CPU Type
CPU Speed
IDE0 Model Name
IDE0 Serial Number
IDE1 Model Name
IDE1 Serial Number
ATAPI Model Name
System BIOS Version
VGA BIOS Version
Chapter 2: System utilities
You can change the value of a parameter if it is enclosed in square
brackets. Navigation keys for a particular menu are shown on the
bottom of the screen. Help for parameters are found in the Item
Specific Help part of the screen. Read this information carefully when
making changes to parameter values. System information differs by
model.
The screens shown in this section are for informational purposes
only. Screen information varies by model, features ordered, and
location.
Shows the CPU type and speed.
Shows the CPU speed.
Shows the model name of the Hard Disk Drive (HDD) installed on the
primary IDE master.
Shows the serial number of the HDD installed on the primary IDE master.
Shows the model name of the HDD installed on the secondary IDE master.
Shows the serial number of the HDD installed on the secondary IDE master.
Shows the model name of the optical device installed in the notebook.
Shows the version of the system BIOS.
Shows the VGA firmware version of the system.
Description
37