Replacing the inverter
Tools you need to complete this task:
v
Screws removed during this task:
To replace the inverter:
Complete the steps in
1
Remove the LCD panel by following the steps in
2
page
84.
Remove the rubber inserts from the front of the LCD panel assembly.
3
Insert
Chapter 3: Replacing notebook components
Flat-blade driver
Phillips #0 screwdriver
2 black M2.5×5
(Keyboard cover)
6 black M2.5×5 (LCD
front panel)
"Preparing the notebook" on page
Insert
Insert
- OR -
2 black M2.5×6.5
(Hinge-bottom)
"Replacing the LCD assembly" on
Insert
Scribe or non-marring tool
4 black M2.5×6.5
(Hinge-top)
55.
Insert
Insert
87