Acer TRAVELMATE 7730 Service Manual page 131

To replace the system board:
Complete the steps in
1
Remove the memory from the old system board and install it on the new system
2
board by following the steps in
57.
Remove the graphics card by following the steps in
3
on page
Remove the hard drive(s) by following the steps in
4
drive" on page 64
If the notebook has wireless networking built in, remove the wireless card from the
5
old system board and install it on the new system board by following the steps in
"Replacing the IEEE 802.11 wireless card" on page
Remove the keyboard cover by following the steps in
6
cover" on page
Remove the keyboard by following the steps in
7
80.
Remove the LCD assembly by following the steps in
8
on page
Remove the palm rest by following the instructions in
9
page 96.
Remove the modem by following the instructions in
10
page 117.
Disconnect the Bluetooth and Express Card cables. Use a scribe or other non-
11
marring tool to gently push the plugs out of the connectors.
Express Card
cable connector
Chapter 3: Replacing notebook components
"Preparing the notebook" on page
61.
and "Replacing the secondary hard drive" on page
78.
84.
"Adding or replacing memory modules" on page
"Replacing the graphics card"
"Replacing the primary hard
67.
"Replacing the keyboard" on page
"Replacing the LCD assembly"
Bluetooth card
connector
55.
73.
"Replacing the keyboard
"Replacing the palm rest" on
"Replacing the modem" on
121