Replacing the keyboard cover
Tools you need to complete this task
v
Screws removed during this task:
To replace the keyboard cover:
Complete the steps in
1
Remove the two keyboard cover screws from the inside of the battery
2
compartment.
Turn your notebook over so the top is facing up.
3
Open the LCD panel to the fully opened position.
4
Insert the small flat-blade screwdriver under each of the hinge covers and gently
5
pry them up.
78
Flat-blade driver
Phillips #0 screwdriver
2 black M2.5×5
(Keyboard cover)
"Preparing the notebook" on page
- OR -
Screw
Chapter 3: Replacing notebook components
Scribe or non-marring tool
55.
Screw