Acer TRAVELMATE 7730 Service Manual page 51

Optional: you can enable the Password on Boot parameter.
5
When you are done, press F10 to save your password and exit the BIOS Setup Utility
6
or you can proceed to setting the User password.
To set the User password:
↑
Press
1
box opens.
Type a password in the Enter New Password field. The password length cannot
2
exceed eight alphanumeric characters (A-Z, a-z, 0-9). The password is not case
sensitive.
Retype the password in the Confirm New Password field.
3
Caution:
Press E
4
When you are done, press F10 to save your password and exit the BIOS Setup Utility.
5
Removing a Password
To remove a password:
↑
Press
1
E . The
NTER
Type the current password in the Enter Current Password field, then press E
2
Press E
3
New Password fields. After removing the password, the value of Supervisor
Password changes to Clear.
When you are done, press F10 to save your password and exit the BIOS Setup Utility.
4
Changing a Password
To change a password:
↑
Press
1
E . The
NTER
Chapter 2: System utilities
↓
or to highlight Set User Password, then press E
Be very careful when typing your password because the
characters do not appear on the screen.
. After setting the password, the value of User Password changes to Set.
NTER
↓
or to highlight Set Supervisor Password or Set User Password, then press
Set Supervisor Password
twice typing anything in the Enter New Password and Confirm
without
NTER
↓
or to highlight Set Supervisor Password or Set User Password, then press
Set Supervisor Password
NTER
et User Password
or S
et User Password
or S
Set User Password
. The
box opens.
NTER
box opens.
.
43