Table of Contents
Advertisement
System Utilities
BIOS setup utility
The BIOS setup utility is a hardware configuration program built into the notebook's BIOS (Basic Input/Output
System). The notebook was shipped already properly configured and optimized. However, if the user
encounters configuration problems, you may need to run Setup.
To run the BIOS Setup Utility:
1.
Turn on the notebook.
If the computer is already turned on, save your data and close all open applications, then restart the computer.
2.
Press F2 when the Press <F2> to enter Setup prompt appears on the bottom of the screen.
Use the left and right arrow keys to move between selections on the menu bar.
Navigating the BIOS setup utility
Use the keys listed in the legend bar on the bottom of the Setup screen to work your way through the various
menu and submenu screens.
To use the BIOS setup utility:
•
To choose a menu, use the left
•
To choose an item, use the up
•
To change the value of a parameter, press F5 or F6.
•
A plus sign (+) indicates the item has sub-items. Press E
•
To load default settings, press F9.
•
To save changes made and close the utility, press F10.
•
Press E
IMPORTANT:You can change the value of a parameter if it is enclosed in square brackets.
-Navigation keys for a particular menu are shown on the bottom of the screen. Help for parameters are
found in the Item Specific Help part of the screen. Read this information carefully when making
changes to parameter values.
-The screenshots used in this section are for illustration only. The values displayed may not be the same
Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook http://faqp.ru/
Chapter 2
HTTP://FAQP.RU/ - хемы, сервис м ну лы, инструкции по р зборке ноутбук
←
↑
and down
while you are in any of the menu screen to display the Exit menu.
SC
→
and right
arrow keys.
↓
arrow keys.
NTER
Chapter 2
to expand this item.
15
Advertisement
Table of Contents
