Download Print this page

Market Forge Industries STHE-7-TGG Installation And Operation Manual page 10

Gas fired steamer

Advertisement

INSTALLATION AND OPERATION MANUAL AND PARTS LIST,
MODELS: STHE-7-TGG, STHE-12-TGG, STHE-16-TGG
INSTALLATION (Continued)
PLUMBING CONNECTIONS:
WARNING: Plumbing connections must comply with applicable
Sanitary, Safety and Plumbing Codes.
Two water lines are provided. Connect water supply lines to the 3/8" copper tubes at the rear of
the steamer.
One line is for supply of water to the generator and one for cold condensate water to condense
live steam entering the drain line.
DRAIN CONNECTIONS:
Appliance drain is 2 inch pipe size. Provide open air gap type drain.
WARNING: An open gap floor drain is required immediately below
the appliance drain.
CAUTION: PVC OR CPVC are not acceptable materials for drains.
PART NUMBER 10225R0
10
2010-09-07

Advertisement

loading

This manual is also suitable for:

Sthe-12-tggSthe-16-tgg