Resetting To The Factory Default Settings - Eneo NXD-980IR37P B Quick Installation Manual

When accessing the Network Camera for the first time, the "Admin Pass-
word" dialog appears. Enter your admin name and password, set by the
administrator.
NOTE: If the password is lost, the Network Camera must be reset
to the factory default settings. See "Resetting to the Factory
Default Settings".
To reset the Network Camera to the original factory settings, go to the
Setup>System> Maintenance web page (described in User's Manual, "3.5.5
System > Maintenance") or use the Reset button on the network camera, as
described below
Reset Button

Resetting to the factory default settings

DE
EN
FR
PL
RU
23