Using The Reset Button; Further Information - Eneo NXD-980IR37P B Quick Installation Manual

Using the Reset Button

Follow the instructions below to reset the Network Camera to the factory
default settings using the Reset button.
1. Switch off the Network Camera by disconnecting the power adapter.
2. Press and hold the Reset button while reconnecting the power.
3. Keep the Reset button pressed for at least 2 or more seconds.
4. Release the Reset button.
5. The network camera resets to factory defaults and restarts after com-
pleting the factory reset.
CAUTION: When performing a Factory Reset, you will lose any
settings you have saved. (Default IP 192.168.1.10)

Further information

The User's Guide is available on the eneo website at
www.eneo-security.com or on the included CD.
24