1. Manuals
  2. Brands
  3. Eneo Manuals
  4. Security Camera
  5. NXD-2012PTZ1080 B
  6. Full manual

Eneo NXD-2012PTZ1080 Full Manual

Minitrax 1/2.8" day/night dome camera, ptz
Hide thumbs Also See for NXD-2012PTZ1080:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Full Manual
Minitrax
1/2.8" Day/Night Dome Camera, PTZ
NXD-2012PTZ1080

Advertisement

Table of Contents
loading

Related Manuals for Eneo NXD-2012PTZ1080

Summary of Contents for Eneo NXD-2012PTZ1080

  • Page 1 Full Manual Minitrax 1/2.8" Day/Night Dome Camera, PTZ NXD-2012PTZ1080...
  • Page 2 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. CAUTION CAUTION RISK OF ELECTRNIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
  • Page 3 FCC COMPLIANCE STATEMENT FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufactu rer’s instructions.

  • Page 5: Table Of Contents

    TABLE OF CONTENTS DESCRIPTION ..............................7 ODELS ................................7 EATURES ..............................7 OMPONENTS ..............................9 INSTALLATION ............................10 Locking Dome Camera ..................... 14 Heater Kit Installation ..........................14 Basic Configuration of Dome Camera System ..................14 Setting Network Dome Camera Adress (ID) ..................14 Setting Network Dome Camera Protocol .....................
  • Page 6 Event In – Motion ............................ 56 Event In – Network Loss ........................58 Event In – Tampering ..........................59 Event Out – SMTP (Email) ........................60 Event Out – FTP & JPEG ........................61 Event Out – HTTP Server ........................64 Event Out –...

  • Page 7: Description

    The camera uses 1/2.8 inch CMOS sensor and Focal length 5.32mm ~ 62.61mm lens and supports PoE (Power over Ethernet), DC12V, and AC24V. Models NXD-2012PTZ1080 Full-HD 60/50fps Mini-PTZ Network Camera Key Features HDTV Video Quality ...
  • Page 8 Day and Night  The camera provides clear monitoring images even in low light conditions using IR-cut filter. Voice Alert Linked to Alarm Detection  The HDS Series can play the audio file stored in the camera in synchronization with alarm detection by the sensor input or the motion detection function.

  • Page 9: Components

    Components The dome camera is designed with compact, small size, hard dome camera housing. The housing is constructed of aluminum, steel and plastic. The housing is designed to be mounted on a wall or a ceiling. The housing meets the Protection Classification IP66 standards for dust and moisture resistance.

  • Page 10: Installation

    INSTALLATION ------------------------------------------------------------------------------------------------------------------------------------- The dome camera is for use in surface or pendent mounting applications, and the mounting member must be capable of supporting loads of up to 1.6 kg. (Pendent mounting must use pendent mount accessory.) The dome camera’s mounting bracket should be attached to a structural object, such as hard wood, wall stud or ceiling rafter that supports the weight of the dome camera.
  • Page 11 CAUTION: Before installing mounting bracket to surface pre-adjust the four mounting screws "A" on the base of the dome camera to best match the mounting bracket locked position. Unscrew the locking screw on the side of the dome's base and fit the tab of the mounting bracket into the locking slot.

  • Page 12: Heater Kit Installation

    Heater Kit Installation 1. Assemble the Heater board to two bossed with screws. Take a reference "B" in the bottom case as below. 2. Place the Heater in the slot "A". Heater cable should be placed away from the Main board. 3.

  • Page 13: Basic Configuration Of Dome Camera System

    Basic Configuration of Dome Camera System Wire Color Description Red: 24VAC or 12VDC+ Main Power: 3-Pin terminal White: 24VAC or 12VDC- Pink: GND Gray: Alarm Input Brown: GND Alarm Input/Output, RS485: 6-Pin terminal Yellow: Alarm Output Green: RS485+ Blue: RS485- Ethernet, RJ-45 port compatible with Black 10/100Mbps having PoE functionality.

  • Page 14: Setting Network Dome Camera Adress (Id)

    Setting Network Dome Camera Address (ID) To prevent damage, each Network Dome Camera must have a unique address (ID). When installing multiple Network Dome Cameras using a multiplexer, it is suggested that the Network Dome Camera address match the multiplexer port number. The factory default setting is 1. If you want to set the address more than 999, you should contact the service provider.

  • Page 15: Ip Assignment

    IP Assignment The eneo scanning device tool is used to locate all eneo network cameras in a local network. The tool does not need to be installed with a setup program. The program exe-file can be started directly from the CD with a simple double click to use the program.
  • Page 16 Select the „Editing the camera IP address“ option to open a window for setting the cameras IP properties. When you are done click the „Activate“ button to update the camera settings. For further information, please refer to the eneo Scan Device Tool Quick Start Guide.

  • Page 17: Operation

    OPERATION ------------------------------------------------------------------------------------------------------------------------------------- Before starting the camera, installation must be complete. The camera completes a configuration sequence within approximately 40 seconds when power is supplied. The amber LED of this megapixel camera flash one time per second indicating the configuration sequence is complete. NOTES - If the DHCP is enabled but the camera is not connected to a DHCP server, the camera will be set default IP 192.168.1.10 and try to get IP from DHCP server about every two seconds.
  • Page 18 The dialog box will be appears. adm in - Type User ID and Password in the dialog box. The default User ID and Password are NOTE For security purposes, be sure to change the password after you log on for the first time.

  • Page 19: Live View

    LIVE VIEW ------------------------------------------------------------------------------------------------------------------------------------- The Live View page provides you to select the properties of video source. You can view the live image from this page and also access the Setup menu and operate the main functions. Live Video Page Icons Hide Main Icons: Hides main icons in the live view page.
  • Page 20 Source: Specify the viewable video stream source to display in live view page. View Size: Specify the viewable video size to display in live view page. Stream Type: Specify the internet protocol to display in live view page. Preset: Specify the specially selected area to transfer using different stream feature in the primary video image.

  • Page 21: Setup

    SETUP ------------------------------------------------------------------------------------------------------------------------------------- The SETUP pages let you manage the camera and change the setting values. For easy and quick accessing video, the setup menu is configured to two parts, Basic Configuration and Advanced Configuration. The Basic Configuration menu allows you to setup Users, basic Network and Image. The remaining configuration parts help to setup user dependent values and provide more advanced settings.

  • Page 22: Basic Configuration

    Basic Configuration Basic Configuration allows user to access the camera image using minimum settings. Also it shows the camera basic information such as Model name, Firmware version, MAC address, IP address, etc. NOTE Some or all of the SETUP menu might not be available if the user does not have proper permission to access these features.

  • Page 23: Users

    Users Use the Users tab to manage user permissions to access the camera and displays list of User name and User Group accounting. User Setting: Click the Enable anonymous viewer login checkbox to enable anonymous user login to the camera. The default setting is disabled. User List Setting: User accounts can be added, modified or removed.
  • Page 24 Provides the lowest level of access, which only allows access Guest to the Live View page. An operator can view the Live View page, create and modify Operator events, and adjust certain other settings. Operators have no access to System Options. An administrator has unrestricted access to the Setup tools Administrator and can determine the registration of all other users.
  • Page 25 3. Click in the Password box and type a password (1 to 8 alphanumeric characters). Passwords are case sensitive. 4. Click in the Confirm password box and retype the password. 5. Click in the User group box and select one of the groups you wish to assign to the user. 6.

  • Page 26: Network

    Network Use the Network tab to manage basic network settings. IP Address Configuration: The DHCP (Dynamic Host Configuration Protocol) server has a feature that automatically assigns an IP address to the device if there is a device on the network. Obtain IP address via DHCP: Select the choice button if you want to assign the IP address from DHCP server automatically, and then the remaining setting are read-only text.
  • Page 27 Video & Image Use the Video & Image tab to Select settings of each stream. If the capture mode is set to 60/50fps, only two streams are available, H.264 and MJPEG, otherwise third H.264 stream is available additionally. Sensor Setting: determines how fast the camera image is captured.
  • Page 28 Codec: User can select the stream profile that is to be used for transmissions. The default setting is High Profile. High The primary profile for broadcast and disc storage applications, particularly for HDTV (High-Definition television) or Blu-ray Disc applications. Main Originally intended as the mainstream consumer profile for broadcast and storage applications.
  • Page 29 - A higher frame rate is advantageous when there is movement in the video stream, as it maintains image quality throughput. GOP size: The higher value saves considerably on bandwidth but may have an adverse effect on image quality. Higher values are only recommended on networks with high reliability. The GOP size can be adjusted in the range from 1 to 60.
  • Page 30 Resolution: Specified as the number of pixel-columns (width) by the number of pixel-rows (height). The Resolution can be adjusted in the range from 320x240 to 1920x1080. The default setting is 640x480. NOTE The maximum resolution setting might not be obtainable due to programmed compression standard and processor power.

  • Page 31: Audio

    Audio Use the Audio tab to manage the basic audio settings for the camera. Audio Setting: Click the Enable audio checkbox to enable audio communication. This page describes how to configure the basic audio settings for the camera. This camera supports full duplex audio that can be transmitted and received in both directions at the same time.
  • Page 32 Audio Input: Adjusts the audio amplifier and volume. Input: User can select the amplifier used, internal or external. Input volume: The Input volume can be adjusted in the range from -12 to 12 dB. The default setting is 0 dB. Click the Mute box if you do not want the audio input. Audio Output: Adjusts the audio volume especially to the Speaker.
  • Page 33 Date & Time Use the Date and Time tab to set the camera’s date and time settings, manually or automatically. Current Server Time: Shows the current date and time. Date: The default setting is 1970-01-01. Time: The default setting is 00:00:00. New Server Time: Select the time zone where your camera is located.
  • Page 34 Date & Time Format: Select one of the Date and Time format. Date Format: The default setting is YYYY-MM-DD. Time Format: The default setting is 24 hours. - Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.

  • Page 35: Video & Image

    Video & Image Use the Video & Image tab to configure custom video stream settings. The camera features multiple video streams with selectable settings for Codec, Resolution, Bit rate control, Bit rate, Frame rate, Quality, and GOP size. The default names for the streams are Stream1, Stream2, and Stream3.

  • Page 36: Image - Basic

    Video & Image – Basic Use the Video & Image tab to Select settings of each stream. If the capture mode is set to 60/50fps, only two streams are available, H.264 and MJPEG, otherwise third H.264 stream is available additionally. Sensor Setting: determines how fast the camera image is captured.
  • Page 37 Codec: User can select the stream profile that is to be used for transmissions. The default setting is High Profile. High The primary profile for broadcast and disc storage applications, particularly for HDTV (High-Definition television) or Blu-ray Disc applications. Main Originally intended as the mainstream consumer profile for broadcast and storage applications.
  • Page 38 - A higher frame rate is advantageous when there is movement in the video stream, as it maintains image quality throughput. GOP size: The higher value saves considerably on bandwidth but may have an adverse effect on image quality. Higher values are only recommended on networks with high reliability. The GOP size can be adjusted in the range from 1 to 60.
  • Page 39 Resolution: Specified as the number of pixel-columns (width) by the number of pixel-rows (height). The Resolution can be adjusted in the range from 320x240 to 1920x1080. The default setting is 640x480. NOTE The maximum resolution setting might not be obtainable due to programmed compression standard and processor power.

  • Page 40: Image - Image

    Video & Image – Image Use the Image tab to adjust the camera image setting values and orientation. Image Appearance: The image appearance allows user to adjust the camera setting parameters and change the camera orientation. All of the parameters are recommended to be adjusted for good image quality suitable at installation site.
  • Page 41 Sharpness: Controls the clarity of the scene. The sharpness can be adjusted in the range 0~15. The default setting is 5. High sensitivity: User can enable sensitivity high to get brighter image in low light environment. The default setting is Off Defog: User can enable defog function in hazy environment to get clearer image.

  • Page 42: Image - Auto Exposure

    Image – Auto Exposure Use the Auto Exposure tab to control the exposure related settings of the camera. Auto Exposure Setting: Exposure is the amount of light detected by the camera sensor. A scene with correct exposure settings has adequate detail and contrast between white and dark values.
  • Page 43 Mode: Supports exposure modes to control the amount of light detected by the camera sensor base on settings for light conditions. The default setting is Auto Auto Camera controls exposure automatically. User can set the maximum gain limit and slow shutter. Manual User can set gain and electronic shutter manually.

  • Page 44: Image - Day & Night

    Video & Image – Day & Night Use the Day & Night tab to control the IR Cut Filter. Day & Night Control: Controls the position of the IR (Infrared) cut filter, which determines the color or black-white setting of the camera. Mode: Supports Day &...

  • Page 45: Image - Auto Focus

    Image – Auto Focus Use the Auto Focus tab to control the Auto Focus. Auto Focus Setting: Auto focus intelligently adjusts the camera lens to obtain focus on the subject. Mode: User can determine focus mode, auto or manual. Auto Focus is automatically adjusted always.
  • Page 46 Avoid continuous, 24-hour use of the auto focus. This will shorten the lifespan of the lens. - Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.

  • Page 47: Image - White Balance

    Image – White Balance Use the White Balance tab to control the white balance. White Balance Setting: Defines how the camera processes video images to render true colors in a scene. White balance is especially effective in scenes with changing lighting conditions or with more than one type of light source.
  • Page 48 White balance R gain: Adjusts the picture output in the red range. The White balance R gain can be adjusted in the range 0-255, where a higher value produces a higher red image. The default setting is 12. White balance B gain: Adjusts the picture output in the blue range.

  • Page 49: Video & Image - Dis

    Video & Image – DIS Use the DIS tab to use digital image stabilization function of the camera. Digital Image Stabilization Setting: User can determine DIS level from 0 to 9 with default value 7 and usage of 4 suppressions, Local motion, Illumination, Plain background, and Slow motion.

  • Page 50: Webcasting

    Webcasting This camera can stream live video to a website. User can copy the HTML code generated on the screen and paste it in page code of the website you want to display live video. Webcasting HTML code: Supports 4 streams for webcasting service. First, selects one from the Stream1 to Stream4 and then copy the HTML code and paste them to your website page code.

  • Page 51: Audio

    Audio This camera supports full duplex audio that can be transmitted and received in both directions at the same time. Basic Use the Audio tab to manage and configure the basic audio settings for the camera. Audio Setting: Click the Enable audio checkbox to enable audio communication. This page describes how to configure the basic audio settings for the camera.
  • Page 52 per million (ppm). Non-uniform quantization (logarithmic) with 8 bits is used to represent each sample, resulting in a 64 kbit/s bit rate. There are two slightly different versions; μ-law, which is used primarily in North America, and A-law, which is in use in most other countries outside North America.

  • Page 53: Event

    Event The Event tabs describe how and when the unit will perform certain actions. On Boot, Alarm In, Manual Trigger, Motion, Network Loss, and Tampering can be set up as alarm sources. Event Out is often set up to upload images, send email and activate output ports. Many event actions require an Event server for their function.

  • Page 54: Event In - Alarm In

    Event In – Alarm In This page allows you to configure the alarm input supported by the camera. Port can be given as Normally Open or Normally Close state, and their Normal state can be configured. The input will be inactive as long as its Normal state equals its Current state.

  • Page 55: Event In - Manual Trigger

    Event In – Manual Trigger The Manual Trigger initiates event when operator clicks Manual Trigger button in the Live View window. This camera provides 4 manual triggers so that user can associate different event out operation on each event. Manual Trigger1~4 Setting: Click the Enable manual trigger checkbox to enable manual trigger.

  • Page 56: Event In - Motion

    Event In – Motion Motion detection is used to generate an event whenever movement occurs (or stops) in the video image. A total of 8 Motion and/or Mask windows can be created and configured. Motion is detected in defined Motion windows, which are placed in the video image to target specific areas.
  • Page 57 Video Preview: Motion detection windows are configured by Motion or Mask windows. Each window can be selected by clicking with the mouse. It is also possible to resize, delete or move the window, by selecting the appropriate window at the mouse menu on the video screen. To create a motion or mask window, follow these steps: 1.

  • Page 58: Event In - Network Loss

    Event In – Network Loss This is used to trigger the event every time the network connection fails. Select “Enable” to activate the Network Loss event. - Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.

  • Page 59: Event In - Tampering

    Event In – Tampering This is used to trigger the event when camera tampering occurs. Select “Enable” to activate the Tampering event. - Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.

  • Page 60: Event Out - Smtp (Email)

    Event Out – SMTP (Email) The network camera can be configured to send event and error email messages via SMTP (Simple Mail Transfer Protocol). If your mail server requires authentication, click the Use (SMTP) authentication checkbox for use authentication to log in to this server. SMTP (E-Mail) Setting: Select “Enable”...

  • Page 61: Event Out - Ftp & Jpeg

    NOTE - If a host name is used, a valid DNS server must be specified in the Network-Basic settings. - Please consult with your network administrator, if you want to change the port number. Enable use(SMTP) authentication: If your mail server requires authentication, click the Use (SMTP) authentication checkbox for use authentication to log in to this server.
  • Page 62 When the network camera detects an event, it can record and save images to an FTP server. Images can be sent as e-mail attachments. Check the box to enable the service. FTP Setting: FTP notification will save a file on the specified FTP server. Click the Enable FTP checkbox and provide the following information for FTP notification: Server: Enter the IP address or host name of the target FTP server.
  • Page 63 If you permit to login FTP server by anyone without password, click the Anonymous login checkbox. JPEG Setting: Configure the JPEG for FTP. Pre-event: A pre-event buffer contains images from the time immediately preceding the event trigger. These are stored internally in the server. This buffer can be very useful when checking to see what caused the event trigger.

  • Page 64: Event Out - Http Server

    Event Out – HTTP Server When the network camera detects an event, the HTTP Server can be used to receive uploaded image files and/or notification messages. Check the box to enable the service. HTTP Server Setting: Click the Enable HTTP server checkbox and provide the following information for HTTP server.
  • Page 65 NOTE Consult with your network administrator for more information on configuring HTTP notification on your local network. - Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.

  • Page 66: Event Out -Alarm Out

    Event Out –Alarm Out When the network camera detects an event, it can control external equipment connected to its alarm output port. Check the box to enable and then select Type from the drop-down list: Enable: When you select “Enable alarm out”, the output will be activated for as long as the event is active.

  • Page 67: Event Out - Audio Alert

    Event Out – Audio Alert When the network camera detects an event, it can output predefined audio data to an external speaker. Check the box to enable the service. Audio Alert Setting: To use the audio alert function, an audio data file must be uploaded from your PC.

  • Page 68: Event Out - Event Notification

    Event Out – Event Notification When the network camera detects an event, the Event Notification Server can be used to receive the event notification. Check the box to enable the service. Notification server URL : Enter the IP address to the Event Notification server Notification server Port: Enter the port number used by the server.

  • Page 69: Event Out - Boost

    Event Out – Boost When the network camera detects an event, the camera can boost a stream to the pre-specified speed or quality. Check the box to enable Boost. Boost Setting: Click the Enable record checkbox to activate Boost function. Boost Stream: Select one of the stream Stream 1/3 : Select Frame rate, Bitrate control, and Bitrate...

  • Page 70: Event Map

    Event Map The event map allows you to change the settings and establish a schedule for each event trigger from the network camera. You can register the event map up to max. 15. Event Map List: An event type is a set of parameters describing how the camera will perform certain actions.

  • Page 71: Event Map - Add

    Event Map - Add Event Map page provides how to configure the event action if there is event triggering such as Alarm-In and Manual trigger. General: Enter the user favorite event name. Name: Click in the Name box and type a user favorite event name (1 to 31 alphanumeric characters).
  • Page 72 Event In: Shows the Event source type to be configured. Type: Selects the Event source type. Event Out: The Event Out provides that the camera will perform certain actions. Email: Click the Email checkbox to enable the emailing below each email address. -- To email address: Click the each email addresses checkbox.

  • Page 73: Dome Configuration

    Dome Configuration Preset If you need to view specific places routinely, you should program presets. A preset is a programmed video scene with automatic pan, tilt, zoom, and focus settings. Once programmed, placing the number position and pressing go button on PTZ Control panel calls up that preset automatically.
  • Page 74 Preset Setup: Toggles PTZ Control window to move the camera, select preset number, and save position. Preset Delete: Delete preset position of Preset number selected. - Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.

  • Page 75: Tour

    Tour There are 8 programmable Tours. Each Tour consists of up to 40 Preset positions.
  • Page 76 Tour number: Select tour number to save or delete programmed tour. The tour number can be selected in the range 1-8. Title: Up to 12 characters. (Alphanumeric characters and space) Repeat: Sets the number of repetition from none to 90 and the default is none. Sequence: User can select either forward or backward sequence in the Tour List.

  • Page 77: Motor Setup

    Motor Setup Motor Setup menu provides the pan and tilt speed of a camera. Proportional P/T: Select on for using Proportional P/T mode. The default setting is on. Max. Pan speed: Select Pan maximum speed. The range is 1~38 and the default setting is 9. Max.

  • Page 78: Rs485

    RS485 The Network Dome Camera can be controlled remotely by an external device or control system, such as a control keyboard, using RS485 half-duplex serial communications signals. Dome ID: Enter identification number for external PTZ device. The ID can be adjusted in the range 1-3999.

  • Page 79: View Angle

    View Angle View Angle menu provides the pan and tilt range of a camera. Tilt angle: This option is designed to limit the view angle as there is some obstruction in zooming out on specific areas of the tilt angle. The range is 0~10 degree and the default setting is 0. - Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.

  • Page 80: System Menu

    System Menu System menu provides the dome information and control the dome answer. Dome Information: The system information provides essential information about the dome if service is required. The information cannot be modified. Dome answer: Select on or off for acknowledge command from the dome. This option is helpful to escape the collision of the command using some DVR.

  • Page 81: Privacy Zone

    Privacy Zone Privacy Zone menu provides a means to hide specific areas of the camera coverage to protect privacy. User can set up to 8 Privacy Zones. Privacy Zone Setting: The following steps describe how to configure the privacy mask zone. 1.

  • Page 82: System

    System The System tabs feature various system information especially network security, advanced network parameter settings, system configurations and maintenance. Information User can give unique Device Name and Location information Device Name Configuration: Shows default device name and user can change for easy identification of the camera.

  • Page 83: Security - Users

    Security - Users The Users tab is for setting various user permissions to access the camera and displays list of User name and User Group accounting. User Setting: Click the Enable anonymous viewer login checkbox to permit the anonymous user login to the camera.
  • Page 84 To add a new user: 1. Click the Add tab, and then new pop-up window appears. 2. Click in the User name box and type a new user name (1 to 14 alphanumeric characters). User names are not case sensitive. 3.

  • Page 85: Security - Https

    To modify a user: 1. Select one of the User Name in the User List Setting you want to modify. 2. Click the Modify tab, and then new pop-up window appears. 3. Click in the Password box and type a password (1 to 8 alphanumeric characters). Passwords are case sensitive.
  • Page 86 Use the HTTPS tab to allow user to access the camera using web browser with encrypted communication. HTTPS Connection Policy: Provides the connection policy when user access the camera using web browser. Connection mode: The default setting is HTTP&HTTPS. HTTP The sensitive data will be transfer without encryption during transmission.
  • Page 87 - SSL requires signed certificates to determine if the web browser accessing the camera has a required authentication. This camera can generate a self-signed certificate using Open SSL. - If you select the HTTP connection policy to HTTP, you cannot access the camera using a URL beginning with “HTTPS:”...

  • Page 88: Security - Ip Filtering

    Security – IP Filtering Use the IP Filtering tab to activate the IP address filtering function that decides which IP address will be allowed normally and which will be denied. IP Filtering Setting: Provides the IP filtering elements such as On/Off, Priority, Policy and IP Ranges.
  • Page 89 NOTES - To add a subnet of network addresses, these must be added in CIDR (Classless Inter-Domain Routing) notation. For example: entering 192.168.1.0/24 will add all the addresses in the range 192.168.1.1 to 192.168.1.254. Please contact with your network administrator for more detail. - If you are accessing the network camera via a proxy server, the IP address for the proxy server must be added as an allowed address.

  • Page 90: Date & Time

    Date & Time Use the Date and Time tab to set the camera’s date and time settings, manually or automatically Current Server Time: Shows the current date and time. Date: The default setting is 1970-01-01. Time: The default setting is 00:00:00. New Server Time: Select the time zone where your camera is located.
  • Page 91 Date & Time Format: Select one of the Date and Time format. Date Format: The default setting is YYYY-MM-DD. Time Format: The default setting is 24 hours. - Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.

  • Page 92: Network

    Network Contact with your network administrator to avoid any network conflicts before setting or changing the IP address of the camera. Network - Basic Use the Network-Basic tab to manage the network settings. IP Address Configuration: The DHCP (Dynamic Host Configuration Protocol) server has a feature that automatically assigns an IP address to the device if there is a device on the network.
  • Page 93 Obtain IP address via DHCP: Select the choice box if you want to assign the IP address from DHCP server automatically, and then the remaining setting are read-only text. Use the following IP address: Select the choice box if you want to assign the IP address manually.
  • Page 94 - Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it...

  • Page 95: Network - Ddns

    Network – DDNS When using the high-speed Internet with the telephone or cable network, users can operate the network camera even on the floating IP environment in which IPs are changed at every access. Users should receive an account and password by visiting a DDNS service like http://www.dyndns.com/ or http://www.cctv-network.co.kr/.
  • Page 96 Register local network IP address: Register a network camera IP address to the DDNS server. - Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.

  • Page 97: Network - Rtp

    Network – RTP Users can configure settings for sending and receiving audio or video on a real-time basis. These settings are the IP address, port number, and Time-To-Live value to use for the media stream(s) in multicast H.264 format. Only certain IP addresses and port numbers should be used for multicast streams.
  • Page 98 Start port: The Start port can be entered in the range 30,000-39,920. End port: The End port can be entered in the range 30,000-39,920. Note The video/audio ports entered here must be even values. Multicast: Only IP addresses within certain ranges can be used for multicasting. The camera has been pre- configured with addresses from these ranges, and does not normally need to be reconfigured.

  • Page 99: Network - Upnp

    Network – UPnP The network camera includes support for UPnP™. UPnP is enabled by default, and the network camera then is then automatically detected by operating systems and clients that support this protocol. UPnP Setting: Click the Enable UPnP checkbox to disable the UPnP. The default setting is enabling.

  • Page 100: Network - Qos

    Network – QoS Quality of Service (QoS) provides the means to guarantee a certain level of a specified resource to selected traffic on an IP network. Quality can be defined as e.g. a maintained level of bandwidth, low latency, no packet losses, etc. DSCP Setting For each of the supported types of network traffic, enter a value for the DSCP (Differentiated Services Code Point) field in the data packet's IP header.
  • Page 101 The main benefits of a QoS-aware network can be summarized as: - The ability to prioritize traffic and thus allow critical flows to be served before flows with lesser priority. - Greater reliability in the network, thanks to the control of the amount of bandwidth an application may use, and thus control over bandwidth races between applications.

  • Page 102: Network - Nat(Port Mapping)

    Network – NAT (Port Mapping) A broadband router allows devices on a private network (LAN) to share a single connection to the Internet. This is done by forwarding network traffic from the private network to the “outside,” that is, the Internet. Security on the private network (LAN) is increased since most broadband routers are pre-configured to stop attempts to access the private network (LAN) from the public network/Internet.
  • Page 103 NAT traversal Settings: Enable: When enabled, the Network Transmitters attempt to configure port mapping in a NAT router on your network, using UPnP. Note that UPnP must be enabled in the network camera. (Please see Setup > System > Network > UPnP, on “4.5.5 System > 4) Network > ④ UPnP”.). Automatic setting: The network camera automatically searches for NAT routers on your network.

  • Page 104: Network - Zeroconf

    Network – Zeroconf Zeroconf allows the network camera to create assign IP address for network cameras and connect to a network automatically. Zero configuration networking(zeroconf), is a set of techniques that automatically creates a usable Internet Protocol(IP) network without manual operator intervention or special configuration servers. Zero configuration networking allows devices such as computers and printers to connect to a network automatically Without zeroconf, a network administrator must set up services, such as Dynamic Host Configuration Protocol(DHCP) and Domain Name System(DNS), or configure each...
  • Page 105 - Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.

  • Page 106: Network - Bonjour

    Network – Bonjour The network camera includes support for Bonjour. When enabled, the network camera is automatically detected by operating systems and clients that support this protocol. NOTES Bonjour – Also known as zero-configuration networking, Bonjour enables devices to automatically discover each other on a network, without having to enter IP addresses to configure DNS servers.

  • Page 107: Language

    Language Use the Language tab to configure the language supported. Language Setting: Provides the option of language supported. Language: The default setting is English. - Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.

  • Page 108: Maintenance

    Maintenance Use Maintenance tab to maintain the camera especially software reset, upgrade, backup parameters and restore parameters. Maintenance: Provides software reset of the camera when troubleshooting. Restart: The camera is restarted without changing any of the setting. Use this method if the unit is not behaving as expected.
  • Page 109 Upgrade: Provides the latest firmware into this camera. When you upgrade the firmware with a file, your camera receives the latest available functionality and unparalleled reliability. NOTE Always read the upgrade instructions and release notes before upgrading the firmware. Upgrade: Upgrades the new firmware as follows.

  • Page 110: Support

    Support The Log and Reports provides variable information on troubleshooting and contact information, should you require technical assistances. Log: The log file records event in the unit since the last system restart and can be a useful diagnostic tool when troubleshooting. System Log: Provides information about system events.

  • Page 111: About

    About The About page shows basic information about this camera as follows: - Full HD / Megapixel Network Camera - Firmware version - MAC address...

  • Page 112: Technical Specifications

    Technical Specifications NXD-2012PTZ1080 MODEL IMAGE AE/AWB D&N True D&N (IR-cut filter) VIDEO Progressive Encoding Compression H.264 (BP/MP/HP), MJPEG Resolution Supported 1920 x 1080p Max. Frame Rate 1080p@60/50fps, 1080p@30/25fps Multiple Streaming Triple Stream (2x H.264 and 1x MJPEG) IN/OUT Audio In/Out In x 1 / Out x 1 (G.711)
  • Page 113 JPEG push DDNS Remote Client MISCELLANEOUS Weatherproof IP66 802.3af Class 3 Power 24VAC, 12VDC, PoE Power Consumption Operating Temperature -10℃ ~ 45℃ Humidity 0 ~ 90% RH External Dimension Φ154 x 150(H) mm PTZ Funtion 360˚ Endless Pan Range Preset: Max.380˚/sec, Manual: Max.380˚/sec Pan Speed Tilt Range 180˚...

  • Page 114: Troubleshooting

    Troubleshooting ------------------------------------------------------------------------------------------------------------------------- If you suspect a problem is being caused by incorrect configuration or some other minor problem, consult the troubleshooting guide below. Upgrading the Firmware Firmware is software that determines the functionality of the network camera. One of your first actions when troubleshooting a problem should be to check the current firmware.
  • Page 115 → Check the Video & Image setting. 8. Blurred images. → Refocus the camera. 9. Poor image quality. → Increased lighting can often improve image quality. Check that there is sufficient lighting at the monitored location. Check all image and lighting settings. 10.
  • Page 116 Videor E. Hartig GmbH Exclusive distribution through specialised trade chan- nels only. Videor E. Hartig GmbH Carl-Zeiss-Straße 8 · 63322 Rödermark/Germany Tel. +49 (0) 6074 / 888-0 · Fax +49 (0) 6074 / 888- Technical changes reserved www.videor.com...

Table of Contents