Connections; Installation - Eneo NXD-980IR37P B Quick Installation Manual

Connections

NO Name
1 Lens
2 Power Cable
3 Ethernet Cable

Installation

Carefully remove the contents from the box, and verity that nothing was
damaged in shipment.
1. Mark the screw hole positions on the ceiling or wall surface using the
Drilling Guide Label.
2. Disassemble the camera by removing the dome cover.
3. Mount the camera assembly using the Anchors (x2) and Screws (x2) to
the surface of the ceiling or wall.
16
Description
Allows wide area to be monitored
Cable for Power source (DC 12V)
Cable for Ethernet (PoE)