Resetting To The Factory Default Settings - Eneo IED-63F0037M0A Quick Installation Manual

EN
Select the „Editing the camera IP address" option to open a window for setting the cam-
eras IP properties. When you are done click the „Activate" button to update the camera
settings.
For further information, please refer to the eneo Scan Device Tool Quick Start Guide.

Resetting to the factory default settings

To reset the network camera to the original factory settings, go to the Setup > System >
Maintenance web page (described in "System > Maintenance" of Users Manual) or use the
Reset button on the network camera inside the bottom cap.
11