Sample Connections For The Use Of Multiple Cameras - Eneo VKC-1310S Installation And Operating Instructions Manual

3.1 Sample connections for the use of multiple cameras

VIDEO OUT jack
Power supply
VIDEO OUT jack
Power supply
PHASE
Note
PHASE adjustment
Read the operation manual first.
Power up unit and other components only after all connections are made.
Continuously turn potentiometer P of camera 1 until the picture off sampling pulse is
synchronous to that of camera 2. Should this be impossible, the same adjustment must
be made to camera 2, yet in the opposite direction to that of camera 1. Subsequently
align camera 3 with camera 2, camera 4 with camera 3 etc., in accordance with the
above-described method.
VIDEO IN jack
VIDEO IN jack
VIDEO IN jack
17
Switch over unit
VIDEO OUT jack
Monitor