Table of Contents
Advertisement
Veo17 Embedded DVR
11. Setup Menu
To reach the Setup Menu right click anywhere in the live view and select "Setup" from the
menu. If the last login has timed out it may be necessary to login again to open the Setup
Menu by entering the password.
12. Setup Menu: Search
Normal Search:
The Search feature allows you to search through the recorded data on one or multiple
channels. Accessing the Search through the Setup Menu leaves all the channels not
selected but if you use the Live View quick Search the same page will open but the
selected channel from Live View will be selected in the Search.
• Select the channel or channels you would like to search through from the channel list
on the right.
• Select the date from the calendar in the bottom right of the screen. Along the very
bottom of the screen is the time line for that day on a 24 hour scale.
• If channel is set to continuous recording there will be a solid blue line above the time
line representing the recorded data. If the channel is set to motion recording there will
be a red line above the time line. In this case there may be large sections of the line
that are omitted. This is because there was no movement for the camera to record.
• Press the play button and drag the vertical yellow line to the required time in the time
line. The + and - at the far right of the time line will adjust the scale of the time line to
more easily set the start and end time of the search.
• You can use the Search toolbar below the time line to Reverse Play, Stop, Play/Pause
move forward or back by 30s, Faster
play (up to 16 times), or jump one day
forward or back.
• Searches can be focused by selecting a type of search to be made on the selected
channels. The drop down menu in the upper left corner of the screen will limit the
search to data sorted by Normal (continuous recording), Event (recording triggered by
an event such as motion or an alarm), Tag (a bookmark added to the data) Smart (two
specifically enabled alerts) or from an External File.
Once the required footage has been found Tags can be attached to the video for easy
future retrieval or clips made for backing up the footage to an external USB connected
storage device.
Event Search
Open the drop down menu in the upper right hand corner that says Normal and select
Event from the list. The event search window will open. Select which event Type to
search for. (Options include Motion, Line Crossing Detection, and Intrusion Detection).
Select which channel to search or select all, And set the Start Time and End time which
contains a calendar to select the date as well. Click the Search button and the record files
matching the search conditions will be displayed in a list on the right side of the screen.
Click the play button on the right of one of the displayed events and it will play. Pre-play
and post play can be configured for the playback of the triggered record files. The search
toolbar can be used to control the playback. The < and > buttons can be used to advance
to the next event or go back to the previous one.
Tag Search
The tool bar in the lower left of the Search screen provides the tools for tagging the foot-
age for easy future retrieval of the data and to create clips for backing up to an external
device.
Click to add a default tag to the data.
Click to add a custom tag. A window will open to input the name of the tag.
Click to open the Tag Management. Edit the names of the tags or delete them.
(Must be in the tag search mode for this option)
Up to 64 tags can be added to a single video file. To search by tag select Tag from the
Drop down menu in the top left of the search screen. The Tag search window will open.
Select the channel and set the date and time and click the search button.
The tags that are associated with that channel for that day/time will be listed on the right.
Click the play button and that tagged clip will play. Set the time required in seconds to
play before the point of the Tag and after in the Pre and Post play settings. Settings include
5, 10, 30, 60, 120, 300, and 600 seconds.
Page 6
Veo17
Rev.
170119
Advertisement
Table of Contents
