Table of Contents
Advertisement
Veo17 Embedded DVR
Live View Menu
The live view menu provides access to the
Set Up Menu and many other features that
configure the way the Live View is seen and
some configurations that will change all the
channels. Many of these options will require a
login to compete. To access the Live View Menu
right click while in the Live View and the menu
will appear.
• Setup: Selecting Setup will open the Main
Setup Menu. It may require a login when this
selection is made. The Setup Menu will be
described in detail below.
• Single Screen: Single Screen will change
the live view to a single screen. A choice of
all 16 channels is provided. Select which
single channel to view in full screen.
• Multi Division: Selecting Multi Division provides a choice of 4, 6, 9, or 16 Divisions
dividing the Live view into that number of viewable channels. Note that using a scroll
wheel on the connected mouse will move to the next or previous channels displaying
in the selected division number.
• Previous Screen: Previous Screen will move the live view back to the previously
viewed channels displayed in the live view.
• Next Screen: Next Screen will move the live view forward to the next set of channels
in the live view.
• Rotation: Rotation will cycle all the channels through a full screen live view. To
use this feature the dwell time must be set by entering the Setup Menu - System
Management - Live View and entering a value in the Dwell time field from a list that
includes No Switching, 10s, 20s, 30s, 60s, 120s, and 300s. If there are less then 16
channels in use the rotation can be limited to only active channels through the Setup
Menu - System Management - Live View window under the View tab. Directions for
this are found under the Setup Menu.
• Start Recording: This feature allows the user to set all the channels to record
Continuously or to set them to record by Motion Detection. Setting them to record
continuously will have all the channels including unused channels will have the "Rec"
icon on the No Video channel in Live View, however with no video feed those channels
will not be recording to the hard drive. They are only ready to receive a signal when a
camera is connected to the channel. If set to Motion Detection the channels will only
record when motion is detected in the camera's field of view saving hard drive space.
In order to use this feature the channel will need to be configured to do so through the
Setup Menu. See instructions for configuring channels for motion detection recording
below in the Setup Menu - Camera section of this manual.
• Quick Settings: Quick Settings has an Output Mode that
provides 4 quick selections to change the picture in the Live
View Mode. Select one that improves the picture.
• Search: Select Search in order to view recorded data from
the selected channel. Accessing the search function this way
will open the Search feature with the selected channel from
Live View already selected. A list of channels is displayed on
the upper right of the screen and it is possible to add more
channels to the search but you cannot remove the original
channel from the selection list. This feature may require a
login to open. For instruction on how to conduct a search and back up please see the
complete description under the Setup Menu - Search.
• PTZ Controls: This option provides Pan, Tilt, and Zoom controls
for PTZ cameras. Selecting it will open the channel in full screen
and provide a control console window. If the camera is a PTZ
camera you will be able to fully control the movement and focus
of the camera from this console. For full instructions on the PTZ
functionality and configurations see Setup Menu - Camera -PTZ
section below.
Live View Configuration
The Live View can be configured by opening the Setup Menu - System Management -
Live View.
• Video Output Interface: Designates the display mode to be used for Live View. The
Veo17 uses VGA and HDMI.
• Dwell Time: Set the Dwell time in seconds for Channel Rotation feature accessed
through the Live View Menu.
• Enable Audio Output: Enables/disables audio output for the selected camera in the
live view mode. Note: Audio is only available on Channel 1.
• Event Output: Designates the output to show event video. The Veo17 will do so with
VGA and HDMI.
• Full Screen Monitoring Dwell Time: The time in seconds to show alarm even
screen.
Set Camera Order
It is possible to configure which cameras are seen in which grid position in the live
view mode. Click the "View" option seen in the image above to open the Camera Order
interface.
The Division can be selected by button below the grid window. For the example above
there is a 4 division.
• Click a division from the grid to select it. Then single click a camera name from the
camera list to the left you would like to display in that grid.
• The icons on the left of the above image allow for quick start live view of all channels
in order and stop live view of all channels. The arrow buttons will allows you to set the
other screens for when more channels then are displayed on the Division are available.
• Setting an X in the grid (by clicking the small X in the box within the grid) will force the
window to not display any camera. This is helpful if there are a number of channels
used that don't match the exact division number. This will prevent the NO Video
message from appearing on unused channels.
• Click "Apply" to save your configurations.
Page 5
Veo17
Rev.
170119
Advertisement
Table of Contents
