Table of Contents
Advertisement
Veo17 Embedded DVR
• Select Channel No. at the top for which channel to configure.
• To quickly schedule the entire day for one type of recording check the all day check
box and set the Type to Continuous, Motion, or VA. Leave this check box empty if you
intend to configure different recording types through the day.
• You can configure up to 8 different schedule recording types per day. Set the start and
end times using a 24 hour clock. The format is HH:MM. Set what type of recording will
be done for that time period from the three types listed above.
• Note that once you have begun to configure recording for a day you must account for
the full 24 hours of that day. There can be no gaps in the timing as there is no default
recording type to fill any gaps.
• Click the "Apply" button to apply the changes. Copy button will copy the configuration
to the other days. The system will not let you apply overlap or save gaps.
• Click the OK button to close the window and return to the main Schedule Recording
window.
• Once all the days are configured as desired, clicking the Copy button will allow that
channel's configuration to be added to all or a selected list of the other channels
• Click the "Apply" button on the main Schedule Recording window to save the
configurations.
Video Settings:
Configure the video settings for each channel. Select from the
Record or Sub Stream configuration options at the top.
Record: Contains the following settings that can be configured on each video channel.
• Channel No: Select which channel to configure from the drop down menu.
• Stream Type: This column separates the table between Main Stream (Continuous) and
Main Stream (Event) these are not configurable simply column headings.
• Video Type: Select Video and Audio or just Video for both Main Stream (Continuous) and
Main Stream (Event).
• Resolution: Set the resolution for both Main Stream (Continuous) and Main Stream
(Event). The options include 1280*720(HD720P), 960*576(WD1), 704*576(4CIF),
640*480(VGA), and 352*288(CIF).
• Bitrate Type: Set to Variable or Constant for both Main Stream (Continuous) and Main
Stream (Event).
• Frame Rate: Set Frame Rate for both Main Stream (Continuous) and Main Stream
(Event). Options include 1fps - Full Frame)
• Max Bitrate Mode: Set the Bit Rate for both Main Stream (Continuous) and Main Stream
(Event) between General or Custom (32-6144).
• Max. Bitrate (Kbps): Set using a soft keyboard number pad for both Main Stream
(Continuous) and Main Stream (Event).
• Max Bitrate Range Recommended: This is not configured but recommends setting the
above Bitrate (Kbps) to a value 164~1090(Kbps) for both Main Stream (Continuous) and
Main Stream (Event).
• Pre and Post-record: Set the time in seconds to be added to video at the beginning and
the end of recording.
• Expired Time (day): This is the longest time for a record file to be kept in the HDD. Set
to 0 the file will not be deleted. The actual time a file is kept should be determined by
the capacity of the HDD.
• Redundant Record: Check this box to assign this channel to record redundantly.
• Record Audio: Check this box for this channel to record audio. Note: the Veo17 can only
record audio on channel 1.
• Video Stream:
• Click the "Restore" button to return the settings to defaults. Click the "Copy" button to
choose which channels should use the same configuration. Click "Apply" to save the
settings.
• Click the "Copy" button to copy the settings to multiple channels. A window will open
allowing the selection of which channels to configure with the current settings.
• Click the "Apply" button to save the changes made to the channel configuration.
• Click "Back" button to return to the Setup Menu.
Sub Stream: Configure the settings for the Sub Stream.
• Channel No: Select the required channel
• Video Type: Select either Video or Video and Audio
• Resolution: Select the resolution for the sub stream. Options include, 960*576(WD1),
704*576(4CIF), 352*288(CIF), 320*240(QVGA), and 176*144(QCIF).
• Bitrate Type: Select between Variable or Constant.
• Video Quality: Select from 6 options from Highest to Lowest.
• Frame Rate: Select from 10, 8, 6, 4, 2, and 1 frames per second.
• Max Bitrate Mode: Select from General or Custom (32-3072)
• Max. Bitrate (Kbps): Set with the soft number pad. It is recommended that the value set
between 511~852(Kbps)
• Max. Bitrate Range Recommended: States that the Kbps value not be set lower then
511 or higher then 852Kbps.
• Click the "Restore" button to return the settings to defaults. Click the "Copy" button to
choose which channels should use the same configuration. Click "Apply" to save the
settings.
• Click the "Copy" button to copy the settings to multiple channels. A window will open
allowing the selection of which channels to configure with the current settings.
• Click the "Apply" button to save the changes made to the channel configuration.
• Click "Back" button to return to the Setup Menu.
Advanced:
Click the Advanced and check the check box if the scheduled recording is to use the
overwrite feature.
Holiday:
Configure up to 10 holiday recording schedules. Click the edit button and configure the
holiday schedule. Enable the setting and set the date and time. Set the frequency this can
be set to weekends or days recurring every month. If it is a yearly holiday select by date.
Click the "Apply" button to save the changes.
Page 10
Veo17
Rev.
170119
Advertisement
Table of Contents
