Table of Contents
Advertisement
Veo17 Embedded DVR
• Select the channel to configure from the Channel No. drop down list.
• Set the Type of VA from the drop down lists Line Crossing Detection or Intrusion
Detection.
• Line Crossing Detection:
Set the Type to Line Crossing
Detection and check the
Enable box. Set the Settings
by selecting which channels
will also begin recording when
the system detects something crossing the line. Set the active time by creating up to
8 different time slots on the 24 hour table. Indicate which Linkage Method to be used
when the line cross is triggered. One two or all three options can be checked from Full
Screen Monitoring, Audible Warning, and Email. Up to 4 lines can be created. Select
which line to configure from the "Line" drop down.
Using the line draw tool click the line and place the beginning of the line
on the camera view and click the end of the line. The line will be dawn on
the screen. To add a additional lines change the Line drop down to Line 2 and draw a
second line and repeat for the third and fourth lines as well. Click the "Clear" button to
clear the lines.
• Click the "Restore" button to restore to the previously saved configuration.
• Click the "Apply" button to save the changes made to the channel configuration.
• Intrusion Detection:
Set the Type to
"Intrusion Detection"
and click the Enable
check box. Set the
Settings by selecting
which channels will also begin recording when the system detects something crossing
the line. Set the active time by creating up to 8 different time slots on the 24 hour
table. Indicate which Linkage Method to be used when the line cross is triggered.
One two or all three options can be checked from Full Screen Monitoring, Audible
Warning, and Email. Up to 4 Intrusion Regions can be configured. Select which region
to configure from the "Intrusion Region" drop down.
Using the Intrusion Region draw tool, click the first 3 corners
defining a quadrilateral and the intrusion zone will be drawn. Click
the full screen button to include the whole screen and the clear button to clear any
the area of previous intrusion zones. To add a additional intrusion Regions change the
Intrusion Region drop down to Region 2 and create a second region and repeat for
the third and fourth lines as well. Set the Sensitivity by adjusting the bar on the right.
Adjust the Percentage of the zone to be covered before the alarm is triggered. The
higher the percentage the more of the defined Intrusion Region will need to be filled
before the alert is triggered. Adjust the Time Threshold. Define how long the Intrusion
Region will be filled in seconds before the alarm is triggered.
• Click the "Restore" button to restore to the previously saved configuration.
• Click the "Apply" button to save the changes made to the channel configuration.
• Click "Back" button to return to the Setup Menu.
17. Setup Menu: System Management
System Info:
System Info displays the information on the system and its configuration
General:
• Language: The Veo17 has only English as language option.
• Resolution: Displays the current resolution and allows for the setting to be changed to
1024*768/60HZ, 1280*720/60HZ, 1280*1024/60HZ, or 1920*1080/60HZ(1080P).
• Time Zone: Displays the current time zone and allows the time zone to be changed.
• Date Format: Displays the current Date format and provides 3 different format options.
• System Date: Displays the System Date. Click to open a calendar to edit the system
date.
• System Time: Displays the system time in 24hour format. Click to open and edit the
time.
• Mouse Pointer Speed: Use the horizontal bar to adjust the speed of the mouse.
• Enable Wizard: Check this to enable the Start Up Wizard to start at every start up of the
machine.
• Enable Password: Check this box to ensure that it will be required to enter a valid
password to make any changes or access any of the function on the Veo17. Note
that if this box is unchecked any person with access to the Veo17 will have
access to all features and data on the Server.
• Click the "Apply" button to save the changes made to the channel configuration.
• Click "Back" button to return to the Setup Menu.
DST Settings:
Configure for Daylight Saving Time.
• Auto DST Adjustment: Check this box to have the Veo17 automatically adjust the
system time for Daylight Saving time.
• Enable DST: Click to enable manual setting of DST settings below. Once enabled set
the "From" and "To" settings for the start and end of the Daylight Saving Time period.
Note the actual date is not selected but the Month then the number for the day of the
week. As an example picture shows April 1st Sun. So the 1st Sunday on April the DST
will configure the system time for DST.
• Click Apply to save the settings.
More Settings:
• Device Name: Click to use the soft keyboard to set a name for the Device. Default is
simply Veo17.
• Device Number: Displays the Device No. Use the soft keyboard to assign a new
number.
• Auto Logout: Set the time the device will wait before it requires a new login to access
system features. Note that setting this to a long period of time will make the machine
accessible to anyone who has physical access tot he machine while the someone is
logged in.
• Menu Output Mode: Set to VGA/HDMI or Auto.
• Click Apply to save the settings.
Page 14
Veo17
Rev.
170119
Advertisement
Table of Contents
