Page 1
Veo17 Embedded DVR Veo17 Local Interface Veo17 Embedded DVR Local Interface User Guide Please read this guide carefully before you install your Veo17. Keep this guide for future reference. i3 INTERNATIONAL INC. U.S.A. 4450 Witmer Industrial Canada 780 Birchmount Road, 1.866.840.0004...
Please remember that as with all i3 video servers, the use of Western Digital RE-rated equipment. hard drives is required for maintaining your original warranty. The Veo17 DVR is backed by Remove the cover from the DVR by unfastening the screws on the back and side.
Default login and password are i3admin / i3admin. Remote Login: It is possible to use a networked computer to remotely access the Veo17. To do so open the browser on the networked computer and enter the IP address of the Veo17 machine into the address window.
Note: Audio is only available on Channel 1. all 16 channels is provided. Select which • Event Output: Designates the output to show event video. The Veo17 will do so with single channel to view in full screen.
Veo17 Veo17 Embedded DVR 11. Setup Menu Event Search Open the drop down menu in the upper right hand corner that says Normal and select To reach the Setup Menu right click anywhere in the live view and select “Setup” from the Event from the list.
Before you begin ensure there is a USB storage device connected to the USB port on the back panel of the Veo17 machine. To back the files up utilize the toolbar in the lower left of the screen. This toolbar is the same toolbar that contains the tools described under the Tag Search section.
It is recommended that you download the Player as well as the Video and log. The Player is a small file and having it in the same folder as data from the Veo17 makes it easy for play back on any computer. They will need to be saved on the USB drive separately. Save one then save the other.
Click Apply to save the settings. General: This displays the hard drive/s installed on the Veo17 with their basic information. At the bottom is displayed the total capacity and free space of all connected storage drives (does not include USB connected storage for back up).
HDD. • Redundant Record: Check this box to assign this channel to record redundantly. • Record Audio: Check this box for this channel to record audio. Note: the Veo17 can only record audio on channel 1.
Tool Bar mentioned above. 17. Setup Menu: Camera The Camera Menu option provides access to the settings and controls for each of the individual cameras connected to the Veo17 Server. Display Settings: • Channel No: Select the required channel. • Active Time: Two active times can be set. Set Active Time 1 to a specific period using...
Adjust it as required. Setting PTZ Presets, Please make sure that the presets, patrols and patterns are supported by the PTZ protocols configured in the previous step. Note: The Veo17 does not currently support PTZ patrols or patterns. Customizing Presets: Set a preset location for the PTZ camera to point to when an event takes place.
• Click “Back” button to return to the Setup Menu. Video Tampering: Configure the Veo17 to trigger an alarm when the lens of a camera is tampered with and respond by changing the channel to full screen, Playing an Audible Warning, or sending an email.
Set the active time by creating up to password to make any changes or access any of the function on the Veo17. Note 8 different time slots on the 24 hour table. Indicate which Linkage Method to be used that if this box is unchecked any person with access to the Veo17 will have when the line cross is triggered.
• MTU (Bytes): Displays the maximum transmission unit. The Default is 1500 and it is recommended that the setting remain at 1500. • Preferred DNS Server: Enter the Preferred DNS Server for the Veo17. Email: • Alternate DNS Server: Add the address of a backup Alternate DNS Server.
Page 16
• Read Community: Set to Public. • Write Community: Set to Private. • Alarm Host IP: With a remote alarm host configured, the Veo17 will send the alarm • Trap Address: Enter the IP address of the SNMP host. event or exception message to the host when an alarm is triggered. The Alarm Host •...
• Edit Button: Click the Edit button to • Send Email: Click this box to have the Veo17 to send an email when it recognizes the edit user’s passwords and user level. selected exception has occurred. Note that configuring the email sender and recipient Click the Change Password check box must be configured.
Upgrading by Local Backup Device: Search Log: • Connect the USB backup device to the port on the back of the back panel of the Veo17. • Set the log search conditions to refine • Click the Local Upgrade tab to enter the local upgrade menu.
Veo17 Storage Detection: Network Detection: This is a monitoring system for the HDD installed in the Veo17 to detect and report on Traffic: various indicators of reliability to anticipate any failures. Check the network traffic to get real-time information for the Veo17 such as linking status, MTU, and sending/receiving rate.