Table of Contents
Advertisement
Veo17 Embedded DVR
Live View:
The Live view Tab was described above under Live View when describing the Live View
and its configurations (Page 3).
Exceptions:
Configure the Veo17 to respond to exceptions. Select which exception to configure and if it
should respond by audio alarm and or Email.
• Exception Type: Select which exception to configure. Options include All, Storage Error,
Network Disconnected, IP Conflicted, Illegal Login, Input/recording resolution mismatch,
and Record Exception.
• Audible Warning: Check this box to have the server make loud beeping noise when it
recognizes the selected exception has occurred.
• Send Email: Click this box to have the Veo17 to send an email when it recognizes the
selected exception has occurred. Note that configuring the email sender and recipient
must be configured.
User Management:
Edit existing and create new users including setting and changing passwords.
• Click the Add button at the bottom of the
screen to create a new user. Enter the
information for the new user including
User Name, Password (Confirm the
password), Level (Operator or Guest.
Operator level has permission of Two-
way Audio in Remote Configuration
and all operating permission in Camera
Configuration by default. Guest has
no permission of Two-way Audio in
Remote Configuration and only has the
local/remote playback in the camera
configuration by default.) Entering the Mac Address the User intends to use to remotely
access the Veo17 here will filter remote connections and only allow that machine
access. Note that entering a Mac address here forces the user to only use that machine
for remote connections.
• Click the Permission button to edit a
user's permissions. Note that the Admin
account cannot be edited in this way as
it has all permissions by default. This
will open a dialog box to provide access
to many Permissions to give or to deny
the user. There are three tabs providing different permissions organized by Local
Configuration, Remote Configuration and Camera Configuration. These permissions
include:
Local Configuration
Local Log Search
Local Parameters Settings
Local Advanced Operation
Local Shutdown / Reboot
• Edit Button: Click the Edit button to
edit user's passwords and user level.
Click the Change Password check box
to open the Password input boxes to
enter a new password and confirm the
password. Enter the Mac Address of
the machine the user intends to use to
remotely access the Veo17. This will deny any machine but the one that matches the
Mac Address entered here from accessing the Veo17 through it's remote web based
interface. If the user intends to access the Veo17 from multiple machines then leave
the Mac Address field blank.
• Click the Delete button to delete a user. A prompt will open to verify if deletion of the
user is intended. Note the Admin Level user can not be deleted.
18. Setup Menu: Management
System Info:
Displays the current configuration settings for the system
record, Network, and Storage tabs to view the system information of the device.
Page 17
Remote configuration
Camera Configuration
Channel Permissions
Remote Log Search
Remote Live View
Remote Parameters
Local Manual Operation
Settings
Remote Serial Port Control
Remote Manual Operation
Remote Video Output
Local Playback
Control
Remote Advanced
Remote Playback
Operation
Remote ShutDown /
Local PTZ Control
Reboot
Remote PTZ control
Local Video Export
.
Click the Device Info, Channel,
Veo17
Rev.
170119
Advertisement
Table of Contents
