Table of Contents
Advertisement
Veo17 Embedded DVR
Log Information:
The operation, alarm, exception and information of the DVR can be stored in log files,
which can be viewed and exported at any time.
Search Log:
• Set the log search conditions to refine
your search, including the start Time, End
Time, Major Type and Minor Type.
• Select the Search button. The log files
that match the search parameters will
be displayed in the lower window. Up to
2000 log files can be displayed. Double
click a log from the list to open it. Click
the "Play" button to view the related
video files if available.
• Click the Export button to export the logs.
Select the backup device from the drop
down list of Device name. Be sure to have a device connected to the USB ports on the
back of the Veo17.
• Create a new folder on the backup device or click the Format button to format the
backup device before the log export.
• The log files exported to the backup device are named by exporting time and are in txt
file format. For example 20170110093841logBack.txt
Import/Export:
The configuration files of the DVR can be exported to local device for backup: and the
configuration files of one DVR can be imported to multiple DVR devices if they are to be
configured with the same parameters.
• Click the Export button to export configuration files to the selected local backup device.
• To import a configuration file, select the file from the selected backup device and
click the Import button. After the import process is completed the Veo17 will reboot
automatically.
Upgrade:
The firmware on the DVR can be upgraded by local backup device or remote FTP server.
Upgrading by Local Backup Device:
• Connect the USB backup device to the port on the back of the back panel of the Veo17.
• Click the Local Upgrade tab to enter the local upgrade menu.
• Select the Upgrade button to start the process.
• Once the upgrade is complete the Veo17 will reboot automatically to activate the new
firmware.
Upgrading by FTP:
Before beginning the upgrade by FTP be certain the FTP Server and the Veo17 are
configured to the same Local Area Network. Run the 3rd party TFTP software on the FTP
Server and copy the firmware into the root directory of TFTP.
• Clip the FTP tab to enter the local upgrade interface.
• Enter the FTP Server Address in the text field.
• Click the Upgrade button to start upgrading.
• Once the upgrade is complete the Veo17 will reboot automatically to activate the new
firmware.
Default:
The Default Page will reset the Veo17 to the default settings.
Clicking on the Default Tab opens the page which simply says the system will reboot and
restore the default settings. Clicking OK at the bottom yo begin the process. Once the
process begins it will continue until the Veo17 is restored to factory default settings.
Page 18
Veo17
Rev.
170119
Advertisement
Table of Contents
