Table of Contents
Advertisement
Veo17 Embedded DVR
17. Setup Menu: Camera
The Camera Menu option provides access to the settings and controls for each of the
individual cameras connected to the Veo17 Server.
Display Settings:
Set the options for what information will be displayed on the channel when in live or
search mode.
• Channel No: Select the required channel.
• Channel Name: Use the soft keyboard to set a name for the camera on that channel.
• Display Name: Check this box to have the camera name displayed in the Live View.
• Channel: Check this box to have the channel number displayed in the Live View.
• Display Week: Will display the day of the week on the channel in Live View.
• Date Format: Set the date format i.e. MM-DD-YY
• Time Format: Set the time format to either the 24 or the 12 hour clock.
• Display Mode: Set how the Channel date and time will be displayed on the channel.
Set the opacity and if it should flash or not.
• OSD Size: Set the size of the text for the channel.
• Click the "Restore" button to return the settings to defaults. Click the "Copy" button to
choose which channels should use the same configuration. Click "Apply" to save the
settings.
• Click the "Copy" button to copy the settings to multiple channels. A window will open
allowing the selection of which channels to configure with the current settings.
• Click the "Apply" button to save the changes made to the channel configuration.
• Click "Back" button to return to the Setup Menu.
Note that the location of the text displaying the above information can be moved by drag-
ging the coloured text frames around the view area as shown in the above image.
Image:
The image tab provides a manual adjustment to the image including brightness and
contrast among others. These are the same settings available through the Quick Settings
Tool Bar mentioned above.
• Channel No: Select the required channel.
• Active Time: Two active times can be set. Set Active Time 1 to a specific period using
the time settings and Active Time 2 will by default take up the remaining time of the
24 hour cycle.
• Mode: Set the Mode to help the camera achieve the best picture. Set from Dim Light,
Standard, Indoor, or Outdoor.
• Set the Brightness, Contrast, Saturation, Hue, Sharpness, and Denoising with the
slide bars or use the up down arrows to fine tune the settings. The image in the view
area will change to reflect the changes as they are made to assist in finding the best
settings.
• Click the "Restore" button to return the settings to defaults. Click the "Copy" button to
copy the settings to multiple channels. A window will open allowing the selection of
which channels to configure with the current settings.
• Click the "Apply" button to save the changes made to the channel configuration.
• Click "Back" button to return to the Setup Menu.
PTZ:
These are the same PTZ controls accessed through the Quick Settings Tool Bar
mentioned above. For the controls to actually move the camera a PTZ camera must be
installed on the channel.
• Select the Correct Channel for the PTZ
camera to be configured.
• Click the PTZ Settings button to
configure the RS-485 settings for the
PTZ camera. All of these parameters
should be identical to the PTZ camera
parameters.
• Set the baud rate.
• Select the PTZ Protocol from the drop
down list.
• Set the PTZ Address.
• Click OK to save the settings.
Page 11
Veo17
Rev.
170119
Advertisement
Table of Contents
