Table of Contents
Advertisement
Veo17 Embedded DVR
• Select the channel to configure from the Channel No. drop down list.
• Enable Privacy mask by clicking the check box.
• Using the mouse drag to create up to 4 boxes to place in the camera view. Each box
will have a colored boarder to represent which box it is.
• Click the "Clear All" button to clear any created boxes or click the corresponding "Clear
Area" box matching the coloured board of the box you wish to delete. The camera view
save the changes made to the channel configuration.
• Click "Back" button to return to the Setup Menu.
Video Tampering:
Configure the Veo17 to trigger an alarm when the lens of a camera is tampered with and
respond by changing the channel to full screen, Playing an Audible Warning, or sending
an email.
• Select the channel to configure from the Channel No. drop down list.
• Enable Video Tampering Detection by clicking the check box.
• The Settings button will open a window to set the Active Time allowing for up to 8
different times when Video Tampering will be active. Set each period by entering
the start and end time using the 24 hour clock inputs. The Linkage Method provides
a selection of Full Screen Monitoring, Audible Warning and Send Email when an
attempt to tamper with the camera is detected. To configure the email response see
instructions below.
• Set the Sensitivity on the sliding bar. The Sensitivity of the detection will increase as it
moves to the right.
• Click the "Copy" button to copy the settings to multiple channels. A window will open
allowing the selection of which channels to configure with the current settings.
• Click the "Apply" button to save the changes made to the channel configuration.
• Click "Back" button to return to the Setup Menu.
Video Loss:
Configure the Veo17 to trigger an alarm when it detects loss of video from the connected
camera and respond by changing the channel to full screen, playing a Audible Warning, or
sending an email.
• Select the channel to configure from the Channel No. drop down list.
• Enable Video Loss Alarm by clicking the check box.
• The Settings button will open a window to set the Active Time allowing for up to 8
different times when Video Tampering will be active. Set each period by entering the
start and end time using the 24 hour clock inputs. The Linkage Method provides a
selection of Full Screen Monitoring, Audible Warning and Send Email when an video
loss is detected. To configure the email response see instructions below.
will permanently block whatever
• Click the "Copy" button to copy the settings to multiple channels. A window will open
is behind the boxes created as
allowing the selection of which channels to configure with the current settings.
shown to the left.
• Click the "Apply" button to save the changes made to the channel configuration.
•
Click the "Copy" button to
• Click "Back" button to return to the Setup Menu.
copy the settings to multiple
channels. A window will open
Video Quality Diagnostics:
allowing the selection of which
Configure the Veo17 to perform video quality diagnostics on Blurred Image, Abnormal
channels to configure with the
Brightness, and Color Cast. The Veo17 will then send out alarms when any of these
current settings.
exceed the level set by the Diagnostic Threshold.
•
Click the "Apply" button to
• Select the channel to configure from the Channel No. drop down list.
• Enable Video Loss Alarm by clicking the check box.
• The Settings button will open a window to set the Active Time allowing for up to 8
different times when Video Tampering will be active. Set each period by entering
the start and end time using the 24 hour clock inputs. The Linkage Method provides
a selection of Full Screen Monitoring, Audible Warning and Send Email when an
attempt to tamper with the camera is detected. To configure the email response see
instructions below.
• Click the "Restore" button to restore to the previously saved configuration.
• Click the "Copy" button to copy the settings to multiple channels. A window will open
allowing the selection of which channels to configure with the current settings.
• Click the "Apply" button to save the changes made to the channel configuration.
• Click "Back" button to return to the Setup Menu.
VA:
VA will configure the Veo17 to send out an alarm if Line Crossing Detection or Intrusion
Detection occurs. The line or the zone for Intrusion detection are configured here. Only
one channel can be configured to for VA at a time.
Page 13
Veo17
Rev.
170119
Advertisement
Table of Contents
