Keysight U1242C Service Manual page 58

2 Service and Maintenance
4 Lift the inner cover to access the fuse
compartment.
Fuse 1 protecting
terminal
7 Ensure that the inner cover is positioned
properly.
8 Close the inner cover of the fuse
compartment.
9 Place the fuse cover back in its original
position and tighten the screws.
58
Fuse 2 protecting
A terminal
3 Lift and remove the fuse cover as shown on
the left.
5 Remove the defective fuse gently by prying
one end of the fuse with a flathead
screwdriver and removing it out of the fuse
bracket.
6 Replace with a new fuse of the same size and
rating.
Keysight U1241C/U1242C Service Guide