Keysight U1242C Service Manual page 36

1 Calibration Procedures
3 When completed, press
4 Exit the unsecured mode by pressing both
See
36
– If the correct security code is entered,
the multimeter will enter the adjustment mode.
– If the incorrect security code is entered, an error code will appear briefly,
after which the multimeter will prompt you for the security code again.
more than 1 second to secure the multimeter again.
Figure 1-5 for the multimeter's display.
Log
.
Hold
Hold
Keysight U1241C/U1242C Service Guide
will appear briefly, after which
Log View
and together for
Shift
Esc