Table of Contents
Advertisement
To enter Cold Weather Mode:
• Press and hold the
To exit Cold Weather Mode, do any one of the following actions:
• Open the hood.
• Start the engine by remote.
• Start the engine with the key.
• Press and hold the
To verify whether the system is in Cold Weather Mode (automatic transmissions only):
• Press the brake pedal:
• If the vehicle is in cold weather mode, the parking lights will stay on while the pedal is pressed.
Valet Mode
When the vehicle is in Valet Mode, the remote starter function is disabled. If the vehicle needs to
be serviced, or if it is parked indoors, the Valet Mode will prevent the engine from being remote-
started accidentally.
Any of the following features will put the remote car starter into Valet Mode:
• Ignition Valet:
• Valet switch:
• To put the system i n t o Valet mode using the KEY (Ignition Valet Mode):
a. Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times
successively into the
The parking lights will flash three times.
b. Turn the ignition
The LED on the antenna will come
successfully entered Valet mode.
• To put the system i n t o Valet mode using the PUSH BUTTON SWITCH (Valet Switch
Mode):
a. Insert the ignition key into the ignition switch.
b. Turn the key into the
c. Within 5 seconds, press the push button switch until the parking lights flash 3 times.
d. Release the push button and turn the ignition to the
The LED on the antenna will come
successfully entered Valet mode.
• To put the system o u t o f Valet mode using the KEY (Ignition Valet Mode):
a. Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times
successively into the
The parking lights will flash twice.
b. Turn the ignition
The LED on the antenna will flash quickly to indicate that the vehicle is now out of
Valet mode.
• To put the system o u t o f Valet mode using the PUSH BUTTON SWITCH (Valet Switch
Mode):
a. Insert the ignition key into the ignition switch.
b. Turn the key into the
Installation Guide
button for 3 seconds or until the parking lights flash three (3) times.
ΙΙ
button for three seconds (the parking lights will flash once).
ΙΙ
This feature allows the user to put the system into Valet Mode by
using the ignition key.
This feature allows the user to put the system into Valet Mode by
using a push button switch (optional).
To put the system i n t o Valet Mode
IGNITION/RUN
OFF.
position
ON
To put the system o u t o f Valet Mode
IGNITION/RUN
OFF.
position.
ON
and
positions.
OFF
solid to indicate that the vehicle has
ON
OFF
solid to indicate that the vehicle has
ON
and
positions.
OFF
position.
P. 23
Hide quick links:
Advertisement
Table of Contents
