Mcd3000 With Mcd Remote Operator Option - Danfoss VLT Pocket Manual

MCD3000 with MCD Remote Operator Option

This is achieved using the MCD Remote Operator
(Cat. No: 175G3061).
MCD3000
-
69
GND
61
+
68
Notes
• A single Remote Operator is required for each MCD3000
• If two Remote Operators are required, the RS485 Network side of the
fi rst Remote Operator (terminals B6, B7, B8) must be connected to the
RS485 starter side of the second Remote operator
(terminals B1, B2, B3)
• The Remote Operator requires an external 18-30 VAC/DC auxiliary
supply.
• For more information on the MCD Remote Operator, refer to the Users
Manual (MG.17.Ex.02) located at www.danfoss.com/drives
46
MCD Remote Operator
RS485
Starter
-
GND
+
®
VLT Soft Starter Pocket Guide
RS485
Network
-
B1 B6
GND
B2
B7
+
B8
B3
Cat. No: 175G3061