Figure 2-3 Removing The Rear Brackets And Rear Wheel Stops - Sun Microsystems Sun Fire 6800 Installation Manual

b. Remove the plastic bag that covers the system and remove the ramps.
2. Unlock the rear door of the cabinet with the system keys and remove the leveling
wrench that is attached to the upper-rear of the cabinet frame.
System keys should be attached to either the front or rear door. The wrench is
attached by a reusable plastic strap. Do not cut the strap.
a. Press the plastic tab to unlock the strap.
b. Loosen the strap to remove the wrench.
3. Remove the rear wheel stop, use the leveling wrench to remove the rear brackets,
then replace the rear wheel stop to prevent the cabinet from slipping off the
shipping pallet (
FIGURE 2-3
Rear wheel stop
Rear brackets
Removing the Rear Brackets and Rear Wheel Stops
FIGURE 2-3
).
Chapter 2 Installing the Sun Fire 6800 System 2-3