Connecting A Null Modem Serial Cable; Connecting A Shielded Category-5 Ethernet Cable; Figure 2-10 Shielded Category-5 Ethernet Cable - Sun Microsystems Sun Fire 6800 Installation Manual

2.5.1

Connecting A Null Modem Serial Cable

1. Connect one end of the null modem serial cable to the serial port marked A on the
left side of the patch panel on the rear of the system (
2. Connect the other end of the null modem cable to the chosen administrative
console (laptop or workstation with a null modem serial port).
3. For instructions on setting up the chosen administrative console and the System
Controller board, refer to the Sun Fire 6800/4810/4800/3800 System Controller
Command Reference Manual.
2.5.2

Connecting A Shielded Category-5 Ethernet Cable

1. Connect one end of the shielded Category-5 Ethernet cable into the lower RJ-45
Ethernet port on the rear of the system (indicated by the arrow in
FIGURE 2-10
2. Connect the other end of the Shielded Category-5 Ethernet cable to the chosen
administrative console (local hub, router, or switch).
3. For instructions on setting up the chosen administrative console and the System
Controller board, refer to the Sun Fire 6800/4810/4800/3800 System Controller
Command Reference Manual.
2-10 Sun Fire 6800 System Installation Guide • April 2001
Shielded Category-5 Ethernet Cable
).
FIGURE 2-9
FIGURE 2-9
).