2
Troubleshooting
2.1
Meter status alarms
Run Daniel MeterLink
diagnostics health check.
Figure 2-1:
If the meter is measuring flow and operating within the calibration parameters the Meter
Status LED is green. If the Meter Status LED is red, an active alarm exists that requires you
to take corrective action. Click the Check Status button to display the Status Summary
screen. The alarms are shown with the primary causes listed first. Click the question mark
next to the alarm to display a help topic related to the alarm and recommended actions to
resolve the issue.
Maintenance and Troubleshooting manual
™
and open the Meter Monitor (Summary) view to perform a
Meter Monitor status alarms
Troubleshooting
9