Extron electronics DP DA2 User Manual page 26

10.
On the Add Device window, the path to the new firmware file is displayed in the
field.
Figure 12. Path to the New Firmware File on the Add Device Window
11. If this is the only device to which you are uploading firmware, click
switcher information is added to the Devices section of the Firmware Loader window
and the Add Device window closes.
If you will be uploading the firmware to multiple DP DA2 units that are connected
to your computer, do the following:
a.
Click Add Next . Your first device is added to the Devices section of Firmware
Loader window, and the Add Device window remains open.
b.
For each additional device you want to add to the Firmware Loader window,
repeat steps 5 through 9, then click
c. For the last device, click
the Add Device window.
Add Next .
(instead of ) to add the device and to close
Add Add Next
DP DA2 • Updating Firmware
Path
. The
Add
20