Table of Contents
Advertisement
9.
On the Open window, navigate to the new firmware file, which has an S19 extension,
and double-click it.
Figure 11.
Open Window for Firmware File Selection
ATTENTION:
Valid firmware files must have the file extension S19. A file with any
other extension is not a firmware upgrade for this product and could
cause the switcher to stop functioning.
NOTES:
•
The original factory-installed firmware is permanently available on the
DP DA2. If the attempted firmware upload fails for any reason, the switcher
reverts to the factory version.
•
When downloaded from the Extron website, by default the
firmware is placed in a folder at
Firmware\DP DA2
Firmware\DP DA2
C:\Program Files\Extron\
(Windows XP) or
C:\Program Files (x86)\Extron\
(Windows 7).
DP DA2 • Updating Firmware
19
Advertisement
Table of Contents
Need help?
Do you have a question about the DP DA2 and is the answer not in the manual?
Questions and answers