Connection - NEC Express5800/T110g-S User Manual
Express server express5800 series
Hide thumbs
Also See for Express5800/T110g-S:
- System configuration manual (35 pages) ,
- Configuration manual (34 pages) ,
- Getting started (2 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
2.2
Connection
Connect peripheral devices to the server. Connectors that enable a variety of peripheral devices to be
connected are provided at the front and rear of the server. Figures on the following pages show the peripheral
devices that can be connected as standard. Connect the peripheral devices before connecting the power cord
to the server.
WARNING
Be sure to observe the following precautions to use the server safety. Failure to
observe the precautions may cause death or serious injury. For details, refer to
Safety precautions in Precautions for Use.
Do not hold the power plug with wet hands.
CAUTION
Be sure to observe the following precautions to use of the server safely. Failure
to observe the precautions may cause burns, injury, and property damage. For
details, refer to Safety precautions in Precautions for Use.
Use only the specified outlet to insert.
Do not connect the power cord to an outlet that has an illegal number of
connections.
Insert the power plug into the outlet as far as it goes.
Use only the specified power cord.
Do not connect or disconnect the interface cable while the power cord is
connected.
Use only the specified interface cable.
Express5800/T110g-S User's Guide
2. Installation and Connection
105
Advertisement
Table of Contents
