Power Cord - NEC Express5800/T110g-S User Manual
Express server express5800 series
Hide thumbs
Also See for Express5800/T110g-S:
- System configuration manual (35 pages) ,
- Configuration manual (34 pages) ,
- Getting started (2 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
2.2.2
Power cord
Connect the provided power cord to the server.
When the power cord is connected to an outlet, POWER LED lights amber during initialization of the system.
Tips
To connect the power cord to a UPS, connect it to the outlet provided at the rear
of the UPS. For details, refer to the instruction manual supplied with the UPS
In order to link the power supply from the UPS with the power-on/off of this
server, the BIOS settings change are required depending on the UPS to which
the power cord of this server is connected.
In the BIOS Setup Utility, select Server, and then AC-LINK to change the
parameter to the appropriate value.
Express5800/T110g-S User's Guide
2. Installation and Connection
107
Advertisement
Table of Contents
