Tandem Trunking - NEC DS1000 Feature Handbook

Join two callers in
Conference, leave the
call and let their
conversation continue.
your callers in an unsupervised Conference. You are no longer
part of the conversation. The Conference continues until either
outside party hangs up. Find out from your Communications
Manager if you are able to set up an Unsupervised Conference.
To set up a tandem call (Unsupervised Conference):
1. Place or answer an outside call.
2. Press
3. Place or answer another outside call.
4. Press
5. Hang up.
this step, you do not have Tandem Trunking capability.
Conference on Hold. Your callers hear Music on Hold
(if installed) while waiting on Hold. Just press
again to reinstate the Conference.
To disconnect a tandem call (using Forced Trunk
Disconnect):
1. Press line key for busy line.
OR
Press
(e.g., 401 for line 1).
2. Dial # or press
CONF
or
CONF
or
If the outside lines disconnect when you hang up in
You can optionally press
and dial the line's Direct Line Access code
DISC

Tandem Trunking

Tandem Trunking (Unsupervised
Conference) allows you to join
two outside callers in a
line-to-line Conference. You can
then drop out of the call, leaving
.
to set up the Conference.
HOLD
to disconnect the line.
to place the
CONF
119